Airbag question?

BigSkySN95

New Member
Jun 16, 2007
7
0
2
I just purchased my first Mustang, a '95, from an insurance auction and the airbags were deployed. My wife told me I had to replace them so I purchased a set off of ebay and the seller failed to tell me they had been painted black and the paint was chipping off to reveal the grey underneath. I got the airbags for the right price but now I'm trying to decide if I should try and dye them or search for new black covers which don't seem to be readily available. Any suggestions?
 
I'm thinking that will be the quickest method but I was worried about re-painting because the existing paint is peeling and when I did some searches on here people were saying to dye the vinyl instead of paint because it will last longer.
 
Get a good cleaner and scrub it with a nylon bristle brush. There is this stuff called Krud Kutter that would be perfect. I scrubbed my interior with that, then wiped it with denatured alcohol when I painted my interior.

And use this.

http://www.latemodelrestoration.com/iwwida.pvx?;item?item_no=MET-F 1&comp=LRS

Get the vinyl. The vinyl matches the factory black 100%, the laquer is off.
 
Holding up pretty good. I scratched the steering wheel air bag cover putting some stuff in the car. It will scratch, but not from normal stuff. The rest of the dash is fine.
 
Too late now but I would have recommended getting a nice MOMO wheel and an airbag delete cover for the pass. side. THen again I do have a 4-pt harness so the bags arent nescessary for me.

Anyways i bet the dye would last a lot longer since it penetrates into the vinyl. However it will be messy to do.
 
That's what I would have done if I didn't have my wife telling me to put the bags back in it. I can't complain since she let me buy it and she doesn't care about the mods I've already ordered.