Airbags (the drag ones)

[Dean85GT]

What company's make the airbags that you stuff in your rear springs to stiffen things up. My slicks are rubbing when I launch hard and I would rather get a set of these then roll my fender lip.

 

[mob]

Eibach has the air bag in their springs
http://store.summitracing.com/partd...925130+4294839061+4294840043+115&autoview=sku

Not sure if you need the springs though, these look like the airbags themselves, not sure though.

http://store.summitracing.com/partd...925130+4294839061+4294873392+115&autoview=sku

 

[90]

i got mine rolled... using the 5lug swap, 17" svt rims with micky thompson street slicks... i get a little rub by myself and hit a good size bump.. and if im riding with 4 people, like to dinner or a saterday/night cruise.. it will rub alot.. then i get a tar like substance under the fenders... pritty nasty so i stoped riden 4.. but after having them rolled its never rubbed racing, can i ask why you dont what them rolled?

 

[poneypower89]

prolly because its body work.. which means expensive.. u could ruin ur paint.. not to mention ruining the factory body lines...

its also a lot more work than just putting in a drag bag.

 

[90]

adding thos bags... i no its prolly not alot.. but arnt you adding weight too ??? i had mine rolled and no paint chips at all visable.. a little nick on the end but no one will ever notice it!!

 

[mob]

adding thos bags... i no its prolly not alot.. but arnt you adding weight too ??? i had mine rolled and no paint chips at all visable.. a little nick on the end but no one will ever notice it!!

like 2.3 pounds? lol

Id try to avoid rolling my fenders aswell.

 

[90]

oh,.. i didnt no how much.. that aint bad at all i guess id go that route too!

 

[Hissing Cobra]

Air Lift makes a rear airbag kit. It retails for around $70.00 and you can get it from Summit Racing. I have this kit and it contains two airbags (one for each side). I've had it in my car for 3 years and they haven't leaked yet.

 

[Dean85GT]

what kind of PSI do you keep in them?

 

[Darkwriter77]

Eibach's drag bags SUCK. I'm ripping mine out and throwing it away whenever I get around to dropping the rear end to do LCA's next spring...

 

[Hissing Cobra]

what kind of PSI do you keep in them?

I run 35 psi at all times and it's fine. Both of them are connected to one line so when I filled them up, I only had to fill one valve.