Alignment Specs

sen2two

I've been lubing and pulling it all morning
5 Year Member
Jul 18, 2013
396
58
59
I'm in need of an alignment. I just installed coilovers up front along with some caster camber plates.

I'm looking for some specs to give to the alignment shop to keep this car from tramlining as mush as possible. I had 275 wide tires front and rear and it was DANGEROUS like that. I swapped to pro stars with skinnies up front to minimize that.

Now hopefully with the proper adjustment, i will be able to run wide tires front and rear.

Anyone know proper alignment specs for good handling?
 
Usually tramlining is a combo of events. Usually it's tires, but sometimes it's too much camber, not enough caster, some toe-out, or a combo of the above.

This article gives a bit of insight to a stock type of alignment setting. Adjustments beyond that require some experimentation.
http://www.mustangandfords.com/how-to/chassis-suspension/m5lp-0207-front-end-alignments/

I actually bought my own alignment aides and just starting to play with a few settings myself. I'd stop short of making recommendations as I'm waiting on installing some C/C plates, and then adding a little more caster and have my toe set at 1/16" in. I habe my camber at -0.5 degree, but I may change this to -1.0-1.5