It seem for some to get over 300rwhp with full bolt-ons, h/c/i, you need a custom cam, possibly ported aftermarket intake, and not retain emissions, Have Long tube headers, good tune etc...
What Rwhp would you get(realistic) with all box stock off the shelf parts. Retaining all emissions legal parts or Carb #...and that will pass smog.
Starting with a freshly rebuilt 302 9-5 comp,forged piston, stock rods,stock crank, just freshend up bearing Etc. Good starting point 190-200rwhp.
Out of the box AFR 165 E, with crane 1.6 roller rockers
Trickflow stage 1 cam,
out of the box edelbrock performer intake
Bolt-ons/supporting mod:
BBk shorty headers, 2-1/2 Catted H-pipe, Mac Mufflers
70mm T.b 70mm egr, 75mm Pro-m Maf, moroso CAI
24# inj., Adj. Fuel press reg., 190lph pump,
U/D pullies, MSD coil, 9mm wires, 6al box, electric fan, K/C clutch, Alum. D/s,
03 cobra t-56, stock 8.8, 410 gears,
full belt, a/c, p/s,smog pump, cats,
What should i expect, more than 300rwhp?
What Rwhp would you get(realistic) with all box stock off the shelf parts. Retaining all emissions legal parts or Carb #...and that will pass smog.
Starting with a freshly rebuilt 302 9-5 comp,forged piston, stock rods,stock crank, just freshend up bearing Etc. Good starting point 190-200rwhp.
Out of the box AFR 165 E, with crane 1.6 roller rockers
Trickflow stage 1 cam,
out of the box edelbrock performer intake
Bolt-ons/supporting mod:
BBk shorty headers, 2-1/2 Catted H-pipe, Mac Mufflers
70mm T.b 70mm egr, 75mm Pro-m Maf, moroso CAI
24# inj., Adj. Fuel press reg., 190lph pump,
U/D pullies, MSD coil, 9mm wires, 6al box, electric fan, K/C clutch, Alum. D/s,
03 cobra t-56, stock 8.8, 410 gears,
full belt, a/c, p/s,smog pump, cats,
What should i expect, more than 300rwhp?