Alright the 9in is in! (pics)

Grantiz84

New Member
May 5, 2008
12
0
1
Oregon
Yes the 9in rear end is in so I hope that my inline 6 won't destroy it?

Here it is before I started.
IMG_0018.jpg


Time for the crappy one to come out!
IMG_0154.jpg


ITS OUT OH MY GOSH
IMG_0158.jpg


Cleaning up the temp wheels just a little work to get these to fit.
IMG_0162.jpg


Much MUCH better
IMG_0160.jpg


The after math
IMG_0161.jpg


well there you go next week the 6cyl front brakes come off! :jaw:
 
  • Sponsors (?)


Hey 68keyblr:

when you had the front 96gt wheels on does if require spacers to fit or can I just bolt them up and go minus the center caps?

Cobain03:

it wasn't to hard took about a day and half, but i got a rebuilt rear end so that saved time. the hardest parts where getting the rear brake line to unthread, shorting the rear drive shaft and finding a universal ujoint to fit the rear end yoke, but the car rides a lot better and I don't have to worry when I put my future 347 or 383 stoker motor in it.