DeadLifter Member Mar 1, 2006 183 2 19 Portland, IN Mar 15, 2006 #1 Mar 15, 2006 #1 Will an aluminum driveshaft from an 88 Thunderbird Super Coupe fit on my 91 LX 5spd.?
Mustang5L5 That is…until I whipped out my Bissell Mod Dude Feb 18, 2001 43,237 17,922 224 Massachusetts Mar 15, 2006 #2 Mar 15, 2006 #2 No
Mustang78 New Member Feb 8, 2006 486 0 0 Aberdeen, WA Mar 15, 2006 #4 Mar 15, 2006 #4 it aint over till its over, if the driveshaft is too long, you can have it cut and welded...if its too short you might have a problem, chances are its long and all is not lost, grab a tape measure and find out, good luck ~Mark~
it aint over till its over, if the driveshaft is too long, you can have it cut and welded...if its too short you might have a problem, chances are its long and all is not lost, grab a tape measure and find out, good luck ~Mark~