Aluminum Drive Shaft

88ponyGTconv · Jul 4, 2017

Ford Performance M-4602-G
or
Summit Racing 790300 one-piece?

What the benefit of dropping another hundy on the one-piece?

-Kevin

RangerJoe · Jul 4, 2017

They look to be $30 apart in price. The FRPP shaft is tried and true, don't know much about the summit, but it has good reviews.

I am GA, so the summit shaft would cost me $21 in tax. The FRPP shaft can be had with free shipping from other vendors out of state. For me, i would stick with the FRPP.

Joe

General karthief · Jul 4, 2017

I have a frpp driveshaft in my junk for the past 15 years, it had the snot beat out of it try'n to fix a bucking problem that was self inflicted, still tru blu
Compare the wall thickness , tube diameter and type of ujoints used in each, but to be real for the difference in price on a stock or a mild build daily driver the money can be spent in better places, or find a used one and have new ujoints installed and balanced.

88ponyGTconv · Jul 4, 2017

karthief said:
I have a frpp driveshaft in my junk for the past 15 years, it had the snot beat out of it try'n to fix a bucking problem that was self inflicted, still tru blu
Compare the wall thickness , tube diameter and type of ujoints used in each, but to be real for the difference in price on a stock or a mild build daily driver the money can be spent in better places, or find a used one and have new ujoints installed and balanced.

Thanks for the feedback, karthief. That's good info. I think I'll go with the alum frpp since it seems to be less hassle than having new ujoints installed and shaft balanced. I have a vibration that starts at 55mph. While I realize that the shot ujoints are probably part of this problem, I'll just go ahead and get the alum drive shaft in case my drive shaft is part of the problem also. I wasn't sure if the "one piece" was worth the extra $$.

-Kevin

General karthief · Jul 4, 2017

They are all 'one piece' for the fox cars, unless you count the yoke and flange, aluminum driveshafts can be a larger diameter and sometimes interfere with exhaust pipes, likely no problem just check to be sure.
New ujoints and a balance are less money than a aluminum shaft and you will never notice the difference. But they do look cool when your cars on a lift.

Mustang5L5 · Jul 4, 2017

Only issue I have with my AL shaft is it rubs the parking brake cables.

Other that that....it looks sexy

88ponyGTconv · Jul 4, 2017

Mustang5L5 said:
Only issue I have with my AL shaft is it rubs the parking brake cables.

Other that that....it looks sexy

Thanks for the heads up. I would hate to ruin a perfectly new alum drive shaft.

jrichker · Jul 5, 2017

Mustang5L5 said:
Only issue I have with my AL shaft is it rubs the parking brake cables.

Other that that....it looks sexy

And I thought that I was the only one with that problem...

Seriously, I think that it only happens when there is a rear disk brake conversion done with a correctly set up parking brake cabling system.

General karthief · Jul 5, 2017

^^^ I just don't know what to say!

rd · Jul 7, 2017

Have the FRPP unit in the 82. It replaced a balanced oem unit that vibrated at about 100. The FRPP has been smooth for the extra 5 or 10 mph at the finish line.

Dan02gt · Jul 8, 2017

Back in the days I had the FRPP one in my '96 GT and moved it to my '02 GT. When I bought my fox it was one of the first things I bought. My car is smooth as silk on the highway.

General karthief · Jul 8, 2017

Don't get me wrong, they are much improved over the steel stick, but it's a lot of money for a stock ride that is a cruiser for the nice days. I got mine back when they were south of 3 hunnert dallas

Mustang5L5 · Jul 8, 2017

I got mine back when they were under $150.

Even then I didn't think it made much difference on the car

BlakeusMaximus · Jul 14, 2017

Makes a difference when running 373s or 410s, at least in my case

88ponyGTconv · Jul 14, 2017

The FRPP arrived yesterday. Hope to have it installed by the end of the day. I'll update the thread and let everyone know how it goes.

88ponyGTconv · Jul 14, 2017

The FRPP arrived yesterday. Hope to have it installed by the end of the day. I'll update the thread and let everyone know how it goes.

Boostedpimp · Jul 14, 2017

The FRPP shaft will eliminate any little vibs you get if you deleted the weight off the rear pumpkin like most do

88ponyGTconv · Jul 15, 2017

Finished the alum drive shaft installation tonight and just got back from the test drive about 30 minutes ago.
Disclaimer - rear u-joints on old drive shaft were shot.
I'm impressed. I can't believe how much smoother she shifts, accelerates and drives. No more vibrations at 55-60 mph. IMHO, worth every penny

-Kevin

General karthief · Jul 15, 2017

There is no doubt that an aluminum drive shaft is an upgrade from the iron stick that has been used, and all the rage in new rear wheel drive cars and trucks.
For a stock ride or even a mildly modified ride if you replace the ujoints and give it a balancing act, you've spent less than half the money and you would be just as pleased.
But it shore do look good when you pull into that jiffy lube place and that guy in the pit see's your shiny shaft
And for the record, yes, I have one too because they look cool and everybody has one!

Bullitt347 · Jul 15, 2017

Price one out for a S197 and be glad the driveshaft for a Fox does not cost as much as one for those cars...north of $700. It is the reason the Bullitt still has the stock 2 piece heavy as hell driveshaft still in it.

Aluminum Drive Shaft

88ponyGTconv

Active Member

RangerJoe

I leave the horn on while driving

General karthief

wonder how much it would cost to ship you a pair

88ponyGTconv

Active Member

General karthief

wonder how much it would cost to ship you a pair

Mustang5L5

That is…until I whipped out my Bissell

88ponyGTconv

Active Member

jrichker

StangNet's favorite TOOL

General karthief

wonder how much it would cost to ship you a pair

rd

Dan02gt

mazing how much gas smell came from that tiny hole

General karthief

wonder how much it would cost to ship you a pair

Mustang5L5

That is…until I whipped out my Bissell

BlakeusMaximus

Still got to try a little lube on my speedo head

88ponyGTconv

Active Member

88ponyGTconv

Active Member

Boostedpimp

88ponyGTconv

Active Member

General karthief

wonder how much it would cost to ship you a pair

Bullitt347

I have been doing it wrong this whole time

Similar threads

Aluminum Drive Shaft

Active Member

I leave the horn on while driving

wonder how much it would cost to ship you a pair

Active Member

wonder how much it would cost to ship you a pair

That is…until I whipped out my Bissell

Active Member

StangNet's favorite TOOL

wonder how much it would cost to ship you a pair

mazing how much gas smell came from that tiny hole

wonder how much it would cost to ship you a pair

That is…until I whipped out my Bissell

Still got to try a little lube on my speedo head

Active Member

Active Member

Active Member

wonder how much it would cost to ship you a pair

I have been doing it wrong this whole time

Similar threads

Privacy & Transparency

Privacy & Transparency