• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

Annoying sounds, please help

  • Thread starter Thread starter nickgt5.0
  • Start date Start date Feb 22, 2007
Prev
  • 1
  • 2
  • 3
First Prev 3 of 3

nickgt5.0

New Member
Jan 16, 2007
96
0
0
Snohomish
Mar 20, 2007
#41
  • Mar 20, 2007
  • #41
lol well sounds like an easy fix for you
 
D

Dante30

New Member
Jul 16, 2005
34
0
0
San Diego
Mar 21, 2007
#42
  • Mar 21, 2007
  • #42
My 94gt does the same thing,I do believe it is detonation. I have not been able to get rid of it from my car. I have about 150k on the engine, still runs good except for that. I have changed the act sensors and swaped out maf sensors. Cleaning it helped a little. Over time the problem has gotten worse. I have the simple typical bolt-ons, car does not check-eng-light, and has always passed smog. I live in So Cal and we have 91 octane. My next move is to try to go with a better maf, and to try to clean out the egr valve. I suspect that if it is dirty w/ carbon build-up, it could function incorrectly.. I don't really know what else to try myself, If you get it fixed, Please let me know how!!!

Dante'
94'gt w/ pulles ,alum. driveshaft, mac shorties, flows, 3.55 out back, cai
 

vladasap

Member
Apr 26, 2006
294
0
16
nyc, ny
Mar 29, 2007
#43
  • Mar 29, 2007
  • #43
dude i had the same exact problem n i couldnt figure it out for days
it was my harmonic balancer
once the rubber slips the outter ring with the timing numbers actually hit my water pump pulley (ye i had to buy a new water pump pulley from bbk sine mine got wrecked)
check it out sounds exaclty like the prob i had ... if not good luck
ps- wouldnt drive the car like that imo
 

DoubleAgentMan

Founding Member
May 2, 2002
151
0
16
South Texas
Mar 29, 2007
#44
  • Mar 29, 2007
  • #44
Sounds like the only thing left on the list of possibilities is the carbon build up...

Any one done an engine top end cleaner like "sea foam" or other??

My brother had a 95' GT that did the same thing.We even went so far as retarding the time to *8 which helped some but was still there.The only thing we never got to try out before he sold it was the engine cleaner and the act...

Just a thought to throw in with the rest...Good luck man.
 

vp6799

New Member
Aug 15, 2006
124
0
0
Massachusetts
Mar 29, 2007
#45
  • Mar 29, 2007
  • #45
gimmie a until tomorrow. I just tried the seafoam trick. I let it suck in through the vacuum line at the brake boaster. Let it sit for 15 min and then started it. Alot of crap came out. Taking it to work tonight so i'll listen for the sounds.
 
C

cbarr300

Member
Jun 6, 2006
746
0
17
goose creek, SC
Mar 29, 2007
#46
  • Mar 29, 2007
  • #46
have you tried twisting your dizzy counter-clockwise? If it goes away then it's def. detonation.

Put your car in 5th gear while you're going at a low speed and floor it. That puts a lot of load on the engine and if it's detonation you'll def. hear it.
 

vladasap

Member
Apr 26, 2006
294
0
16
nyc, ny
Mar 29, 2007
#47
  • Mar 29, 2007
  • #47
check harmonic balancer
mine took a dump on me and the outter ring was hitting the water pump pulley at high rpm's
keep us posted n good luck
 

vladasap

Member
Apr 26, 2006
294
0
16
nyc, ny
Mar 29, 2007
#48
  • Mar 29, 2007
  • #48
i already mentioned this yest. didnt i??
ooops
 

vp6799

New Member
Aug 15, 2006
124
0
0
Massachusetts
Mar 30, 2007
#49
  • Mar 30, 2007
  • #49
I do believe SeaFoam did the trick for me. I didn't hear the noise going to and from work. Gonna take it for a nice ride today to make sure. There was some nasty crap that came out of the exhaust. Might do it again to make sure it's clean.

Vic
 

nickgt5.0

New Member
Jan 16, 2007
96
0
0
Snohomish
Apr 2, 2007
#50
  • Apr 2, 2007
  • #50
well i forgot about this thread lol but yeah i just did a new harmonic balancer about a month ago to stop my shake problem and the noise happened before and after that so ill try seafoam.
 

vp6799

New Member
Aug 15, 2006
124
0
0
Massachusetts
Apr 2, 2007
#51
  • Apr 2, 2007
  • #51
nickgt5.0 said:
well i forgot about this thread lol but yeah i just did a new harmonic balancer about a month ago to stop my shake problem and the noise happened before and after that so ill try seafoam.
Click to expand...

Yea man, it worked for me. Still haven't gotten the noise.
 

nickgt5.0

New Member
Jan 16, 2007
96
0
0
Snohomish
Apr 11, 2007
#52
  • Apr 11, 2007
  • #52
back to top
 

nickgt5.0

New Member
Jan 16, 2007
96
0
0
Snohomish
Apr 11, 2007
#53
  • Apr 11, 2007
  • #53
where can i get seafoam at and how much?
 
R

RAD

New Member
Jun 16, 2006
167
0
0
Apr 11, 2007
#54
  • Apr 11, 2007
  • #54
http://www.seafoamsales.com/buy.htm
 

nickgt5.0

New Member
Jan 16, 2007
96
0
0
Snohomish
Apr 29, 2007
#55
  • Apr 29, 2007
  • #55
what do i need to do to set the timing on my car, stuff like unplug wires, vacumm hoses, etc.
 
S

sage2k

Member
May 23, 2005
645
0
16
Baton Rouge, LA
Apr 29, 2007
#56
  • Apr 29, 2007
  • #56
Does it do it in neutral when you rev it up?
it does sound like bad pinging, if it doesnt do it in neutral it might very well be detonation
change your spark plugs, cheap and it might help
 

nickgt5.0

New Member
Jan 16, 2007
96
0
0
Snohomish
Apr 29, 2007
#57
  • Apr 29, 2007
  • #57
i was with my dads friend that was a engine builder for nascar and he said its a ping and he said first thing we should do is reset the timing.
 

Joey5.0

Member
Feb 13, 2006
313
1
16
Usa
Apr 30, 2007
#58
  • Apr 30, 2007
  • #58
Go get some new plugs tommorow and we will time it at Wills.
 

nickgt5.0

New Member
Jan 16, 2007
96
0
0
Snohomish
May 5, 2007
#59
  • May 5, 2007
  • #59
well i was at my dads and my dads friend had his timing light with him so we hooked it up and my timing was at 19, so we took it down to 13 and no more noise. thanks for all the help
 
Prev
  • 1
  • 2
  • 3
First Prev 3 of 3
You must log in or register to reply here.

Similar threads

A
Rough idle - cylinder 1 and 6 misfire HELP
  • austindavies935
  • Jul 24, 2025
  • SN95 4.6L Mustang Tech
Replies
12
Views
671
SN95 4.6L Mustang Tech Jul 24, 2025
gkomo
Drivetrain 83’ Glx convertible C5 Trans help!
  • JacksonJared2113
  • Dec 25, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
369
Fox 5.0 Mustang Tech Dec 26, 2025
JacksonJared2113
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
45
Views
2K
1965 - 1973 Classic Mustangs -General/Talk- Feb 4, 2026
nickyb
M
Chasing a vibration. Help!
  • Mr Bighead
  • Jun 6, 2023
  • 2005 - 2009 Specific Tech
Replies
0
Views
1K
2005 - 2009 Specific Tech Jun 6, 2023
Mr Bighead
M
Progress Thread H/C Swap Problems/Ideas
  • sav22rem22
  • Mar 31, 2024
  • Fox 5.0 Mustang Tech
Replies
10
Views
2K
Fox 5.0 Mustang Tech Sep 10, 2024
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?