I had vibration troubles that ended up being the harmonic balancer. While hunting for the cause I found the trans had a broken spring in the 1-2 accumalator. I put in a Transgo shift kit and replaced the torque convertor; because of the famous Ford 3-4 shudder. I used the merc V whcih I found out is wrong for the 94-95, so I switched back to the lll.
Now my problems really begin. The trans has a great 1-2 shift but will not go past second gear now. I pulled the valve body back out and double checked the installation it is according to the instructions. The trouble code is the no signal from the trans control switch. I replaced the switch and still can not get it to shift manual or automatic.
Any help or suggestions will help my sanity and keep me from shooting my horse.
Now my problems really begin. The trans has a great 1-2 shift but will not go past second gear now. I pulled the valve body back out and double checked the installation it is according to the instructions. The trouble code is the no signal from the trans control switch. I replaced the switch and still can not get it to shift manual or automatic.
Any help or suggestions will help my sanity and keep me from shooting my horse.
