Another Clutch Cable Problem

[HISSIN50]

Talk to MM. You should not need a spacer (in effect, making your FWA 'longer'). Something isn't right on your car and they might have some ideas.

 

[Brando5641]

Its not the car. It has new flywheel,clutch,TOB,fork,steel retainer,new tranny.

 

[HISSIN50]

Is it a stock replacement fork?

 

[Darkwriter77]

I'm thinking it's your quad. Not all aftermarket clutch quadrants are made with the same dimensions. It might be allowing for too much slack - more than your FWA can allow you to dial out. Maybe look into getting a different quad from Maximum Motorsports, or UPR.

 

[HISSIN50]

Since it's a kit, that should be the most optimal quadrant there is for that cable.

 

[Brando5641]

Since it's a kit, that should be the most optimal quadrant there is for that cable.

It is a dorman fork,oreilly fly and clutch,also the best TOB they have and a steel bearing retainer from Hanlon Ms.


Posted via Mobile Device

 

[HISSIN50]

How did the fork compare to the stocker when held side by side?

 

[Brando5641]

it looked the same.

 

[Mustang5L5]

I bought the Ford kit for $50 that comes with the cable and a new clutch fork.

Granted, i've onl driven 600 miles on it though...