• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Another clutch Q

  • Thread starter Thread starter 86turbo
  • Start date Start date Mar 4, 2009
Prev
  • 1
  • 2
First Prev 2 of 2

86turbo

Member
Apr 8, 2006
183
0
17
Mar 7, 2009
#21
  • Mar 7, 2009
  • #21
haha come on guys. I guess stangnet hasn't changed and prob never will. How about this idea! Lets rate clutches from strongest to lightest pedal feel..this wouldn't be determined by the clamping pressure of the pressure plate would it? I think this would be very informative but might turn into a pissing match at the same time haha.

Drew
 

5spd GT

"the 5.0 owns all"
Founding Member
Aug 7, 2002
9,516
6
99
Arkansas
Mar 7, 2009
#22
  • Mar 7, 2009
  • #22
Out of the Box softest pedal in the standard aftermarket - Centerforce.

I have used the CF pressure plate for 30,000 miles so far on a h/c/i ride.
 
3

347HO

Member
Jan 13, 2008
462
2
16
Seattle
Mar 7, 2009
#23
  • Mar 7, 2009
  • #23
86turbo said:
haha come on guys. I guess stangnet hasn't changed and prob never will. How about this idea! Lets rate clutches from strongest to lightest pedal feel..this wouldn't be determined by the clamping pressure of the pressure plate would it? I think this would be very informative but might turn into a pissing match at the same time haha.

Drew
Click to expand...

One reason I read and post here, are to challenge those who give bad/incorrect/misinformation. There's always someone who will know more than I, and in those cases... I listen, I learn. There's a lot of people here who should do more listening IMO.
Another reason I read and post here are the Sponsors.

86turbo said:
haha come on guys. I guess stangnet hasn't changed and prob never will. Drew
Click to expand...
So in your opinion, what needs changing?

86turbo said:
Lets rate clutches from strongest to lightest pedal feel..this wouldn't be determined by the clamping pressure of the pressure plate would it?
Click to expand...
I honestly don't have a suggestion here. I don't buy a clutch for pedal feel. It is what it is when you have the right base pressure and finger pressure for your setup.
It's not a matter of clamping pressure, it's the release pressure which has the most affect on pedal feel. Depending on style of clutch will determine how many other factors affect pedal pressure.
 

Rick 91GT

Mustang Master
Nov 29, 1999
9,692
95
99
PA
Mar 8, 2009
#24
  • Mar 8, 2009
  • #24
347HO said:
It's not a matter of clamping pressure, it's the release pressure which has the most affect on pedal feel. Depending on style of clutch will determine how many other factors affect pedal pressure.
Click to expand...

That is 100% true!

In reply to my comments...I know it's a street car and I gave a race car expierence, my point was Walt and the guys at Promotion have some very nice profiles that will hold a lot of power and torque, but are not as violent as some of the other models.

Heavy pedal is in the eye of the beholder....


347- Im interested in why you do not like the puck style on a high hp/tq, traction combo? Is it due to the shock on the trans and tires, since they do not tend to slip?I have my own theories..... Have you seen the new literature that comes with the high end Tremecs regarding aggressive clutches?
 
3

347HO

Member
Jan 13, 2008
462
2
16
Seattle
Mar 8, 2009
#25
  • Mar 8, 2009
  • #25
Rick 91GT said:
347- Im interested in why you do not like the puck style on a high hp/tq, traction combo? Is it due to the shock on the trans and tires, since they do not tend to slip?I have my own theories..... Have you seen the new literature that comes with the high end Tremecs regarding aggressive clutches?
Click to expand...

I have always had very good results with the full disc type clutch setup. I've almost always owned a car which I drove to the track and ET bracket raced, so I know from experience they are consistant and have a low failure rate.
I have friends and opponents and friends who are opponents who've used the puck style clutch and at some point in time had unforced failure.

I attribute this to the design.
1. higher psi on the clutch media to the flywheel is needed (less friction surface area).

2. uneven heat build up (once the clutch is engaged and no longer slipping, the flywheel disc will have hot areas where the puck is engaged and cooler spots between the pucks).

3. aggressive engagement and less slippage due to #1.

4. uneven wear on the flywheel disc and plate due to #2.

I am not a clutch engineer, nor do I claim to be a clutch expert. I know what I know from experience, and from others much smarter than I.
 

86turbo

Member
Apr 8, 2006
183
0
17
Mar 8, 2009
#26
  • Mar 8, 2009
  • #26
I was on here since 2002 under a dif user name and all I was saying was when people post threads it will turn into a pissing match most of the time. That's why I went to foureyedpride instead. This site has good info though
 
Prev
  • 1
  • 2
First Prev 2 of 2
You must log in or register to reply here.

Similar threads

R
Drivetrain Clutch
  • Robman8028
  • Jun 29, 2025
  • Fox 5.0 Mustang Tech
Replies
4
Views
359
Fox 5.0 Mustang Tech Jul 2, 2025
AeroCoupe
K
TKX Transmission Shifting Problem
  • KWC156
  • Jun 23, 2025
  • Other Auto Tech
  • 2
Replies
21
Views
3K
Other Auto Tech Jun 13, 2026
427nostang
4
H
Drivetrain 4R70W clutch friction/metals/piston set up questions for transmission guru
  • Hizdudeness
  • Apr 4, 2024
  • Fox 5.0 Mustang Tech
Replies
2
Views
1K
Fox 5.0 Mustang Tech Nov 15, 2024
slow84lx
S
V
Drivetrain Clutch Cable too Short?!
  • vpap1
  • May 9, 2023
  • Fox 5.0 Mustang Tech
Replies
9
Views
3K
Fox 5.0 Mustang Tech May 23, 2023
vpap1
V
Progress Thread "Alter Ego" White 1993 LX 5.0 5spd
  • idareu
  • Sep 9, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3
Replies
42
Views
3K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 19, 2025
idareu
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?