another pcv question (application specific)

G

Green 94 5.0

Founding Member

Mar 25, 2002

2,601

12

79

Ft. Lauderdale, FL

Nov 27, 2005

#1

• Nov 27, 2005

• #1

im in the process of putting my car back together and have some pcv related questions. right now i have an h/c/i setup and an s-trim that will be seeing 12psi. i have breathers in both valve covers and the pcv completely blocked off. my decision now is whether to buy new valve covers and reinstall the pcv system. being that the oil fill tube on the covers doesnt have the nipple to connect the air hose to the inlet tube, is it worth reinstalling the system even though it wont be complete?

 

BlueOvalStangGT

Active Member

Oct 27, 2003

2,849

0

46

Tampa Florida....USF!!!

Nov 27, 2005

#2

• Nov 27, 2005

• #2

I think if you only reconnect that part itll be something like a vacuam leak. Im not sure I fully understand your post. Why do you want to put it back on? Im in the process of deleting mine.

 

G

Green 94 5.0

Founding Member

Mar 25, 2002

2,601

12

79

Ft. Lauderdale, FL

Nov 27, 2005

#3

• Nov 27, 2005

• #3

i mainly dont want any problems when the new motor goes in. by the way, how are those tfs heads working with the new combo? im just curious because they were on my car before i sold them to joe and they flowed way too much for my n/a setup. i figured they would kick ass with forced induction.....

 

BlueOvalStangGT

Active Member

Oct 27, 2003

2,849

0

46

Tampa Florida....USF!!!

Nov 27, 2005

#4

• Nov 27, 2005

• #4

Ive yet to get any kind of numbers, still learning this tweecer thing. I was going good but then at 4500 rpms I would peg the MAF. Tonight I swapped from a ProM75m calibrated for 36's to a ProM 77mm calibrated for 42's. Got some 42# injectors for it as well. Car doesnt run very well since I dont have a flow sheet and the general one in the Tweecer sucks.

 

G

Green 94 5.0

Founding Member

Mar 25, 2002

2,601

12

79

Ft. Lauderdale, FL

Nov 28, 2005

#5

• Nov 28, 2005

• #5

weird.....the predefined transfer for 42's worked perfect for me.....i only had to tweak the fuel tables slightly to make everything perfect.