• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

another swap question

  • Thread starter Thread starter poorracer
  • Start date Start date Jun 17, 2006
P

poorracer

New Member
Nov 13, 2005
37
0
0
chickasha,ok
Jun 17, 2006
#1
  • Jun 17, 2006
  • #1
ok, what all do i need to do the 4-cyl to v-8 swap,i know some of it but not all, the radiators show to be the same for both of them, also i am going to stay with the 4-cyl brakes, i am going carbed, and probably a mechanical pump(maybe electric), ? what all stuff do i need? 2nd what do i need to put a 351 and a c-4 or c-6 in it,
 
N

NFGTragedy

New Member
Oct 19, 2004
155
0
0
Rochester, NY
Jun 18, 2006
#2
  • Jun 18, 2006
  • #2
I just did this with but with an efi setup... carb is probably easier. Anyways heres my "small" list... not sure if all of it needs to be done for the carb setup but here goes...

extend alternator wire
5.0 guage cluster... 87-89 and 90-93 are different due to the airbag setup.
fuel lines
throttle cable
motor mounts
dual exhaust setup
double hump tranny mount
passenger side exhaust hangers (2)... i bought the ford parts.
fuel pump
possibly the springs... your choice.
possibly sway bars... your choice again.

NOW... from what i have heard you can use the "t5"(?) out of the 4cyl if it is stick but you will need to change a few things on it... or you can swap trannys for an aod/t5... if you plan to beat on it i'd probably say you want to do the tranny swap... in that case... plan for the tranny, linkage, and a shifter and a new speedo cable .

if you switch the tranny you need to run the 5.0 style driveshaft... larger in diameter from 4cyl... and if you will probably want to run the trac-loc 8.8 rear. You can run the 7.5 from what i've heard but it won't hold up worth crap and no one likes one wheel peel

with a 8.8 rear in you will notice the rear brake lines are actually run different between 5.0 cars and 4cyl... i swapped mine for the 5.0 style... but i have heard you can run the 4cyl setup but you need to reflare a brake line... (possibly extend it / reroute? ). they are run on different sides of the car i forget which is which.

that is all you really need... but then again i would recommend doing the fronts to the gt style or possibly go to a 5 lug setup with some nice pbr's... the 4cyl brakes were horrible for the 4cyl... now add a v8 to it and see how well it works. The early 80's 5.0l's came with the 4cyl brakes though so your choice.

if you do the front spindle / brake swap to the gt (87-93) style then you will need to swap the booster and mc along with it to get the proper brake assist... though i have heard you can run the 4cyl booster with the 5.0 mc but i would assume the pedal would be rock hard.

thats really your choices and what not... sorry if its jumbled.. came out as i was trying to remember.

enjoy... its a fun little project that has managed to eat my entire bank account but then again... no regrets
 
You must log in or register to reply here.

Similar threads

P
Fuel New Eldebrock 1406 problems 1985 GT 5.0
  • Paddyman
  • Oct 22, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
184
Fox 5.0 Mustang Tech Nov 2, 2026
manicmechanic007
H
Drivetrain 6R80 to t56 swap
  • Holymoses
  • Apr 25, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
428
Fox 5.0 Mustang Tech Apr 25, 2026
AeroCoupe
D
Yet another v8 swap
  • dulcimerbob
  • Sep 19, 2026
  • 1974 - 1978 Mustang II Talk & Tech
  • 4 5 6
Replies
113
Views
3K
1974 - 1978 Mustang II Talk & Tech Nov 10, 2026
LILCBRA
Engine Themostat
  • Mindseye007
  • Jan 30, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
1K
Fox 5.0 Mustang Tech Feb 1, 2026
86HO5.0
8
W
Front ATS brakes with Taurus rear brakes. Full parts needed?
  • Wagonized
  • Sep 24, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
308
Fox 5.0 Mustang Tech Sep 25, 2026
General karthief
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?