Any Mustang Experts Local To Virginia Beach/norfolk Area?

[JasinC19]

I'm having a hard time getting my build running right. Does anyone know of a professional for hire in the Virginia Beach/Hampton Roads area that is knowledgeable enough about our cars to help me out?

Build is basically Trick Flow top end kit on a 306 professionally assembled.

Thanks,
Jason

 

[dcurtis]

That shouldn't be hard, what problems are you having.

 

[JasinC19]

Won't idle, can't keep it running. Runs really rough. So far I've confirmed that fuel injectors each have power going to them. Checked compression.

I have so many new parts, it's hard to say what is wrong.

 

[jsw81]

Check codes?

Distributor may not be stabbed correctly either.

Also make sure your valvetrain is working properly...I had some issues with mine when I found I adjusted my rockers too tight and was only running on 7 cylinders. It idled rough and would not rev smooth. Then not too long after I found the machine shop over torqued a rocker stud and it got stripped, so again my valvetrain was not working correctly and ran rough. I ended up using a helicoil and fixed that issue. Runs great now. You're not the only one that's had issues. Don't give up, you'll get it!