Any Mustang Experts Local To Virginia Beach/norfolk Area?

That shouldn't be hard, what problems are you having.

Check codes?

Distributor may not be stabbed correctly either.

Also make sure your valvetrain is working properly...I had some issues with mine when I found I adjusted my rockers too tight and was only running on 7 cylinders. It idled rough and would not rev smooth. Then not too long after I found the machine shop over torqued a rocker stud and it got stripped, so again my valvetrain was not working correctly and ran rough. I ended up using a helicoil and fixed that issue. Runs great now. You're not the only one that's had issues. Don't give up, you'll get it!