Any one using Anderson cams in their n/a 331 or 347's?

[Grn92LX]

JUst wondering. If you are, post your dyno sheets, full combo and any other info you have! Thanks,

Mike

 

[N8Miller]

i know that rick91gt told me that he was using one in his or his dads car. said that it worked really well.... im sure that he will find his way to this post

 

[Rick 91GT]

I ran a AFM N-61 in my NA 302, worked very well for my set-up and got me to my goal.

Dads car had a Crane 2031 on his 331 and now the new DART block motor has a FTI grind.

 

[TC93]

I run a B-31 in my blown 331 car, But before adding the blower I ran the set up NA for about 8 months. Combo consist of dished pistons for 8.5:1 compression, TW heads, E-brock RPM intake, 70mm TB, shorty headers, 30# injectors, AOD with 3.55's. Never had it dynoed but it ran pretty good being set-up or boost. On 245/50/16 Nitto DR's and a 3450 race weight it ran a best of 12.78 @ 106 in the 1/4 and 8.14 in the 1/8.