• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SVT Tech Forum

Any suggestions for '03 Cobra exhaust mods?

  • Thread starter Thread starter 03stangvert
  • Start date Start date Jan 27, 2008
  • 1
  • 2
Next
1 of 2 Next Last
0

03stangvert

New Member
Apr 11, 2007
17
0
0
Versailles Kentucky
Jan 27, 2008
#1
  • Jan 27, 2008
  • #1
I just recently purchased a black '03 Cobra Convertible that is bone stock. I sold an '03 GT convertible which had Flowmaster 40 series after-cat and a MAC O/R H-pipe. The GT sounded good outside but, it had the dreaded "drone" sound inside the car if any knows what I mean by that (like a humming noise). Any suggestions on which brand of aftercat and mid pipe to use and whether to go with an X or H pipe. I'm kind of leaning toward Magnalfow or Bassani. I'm looking for a good deep rumble at idle and the raspiness under throttle. Any suggestions would be greatly appreciated!!!

 

fobra559

At least it's more erect and not floppy anymore.
Nov 1, 2007
721
0
0
Lindsay, CA
Jan 27, 2008
#2
  • Jan 27, 2008
  • #2
Check out youtube, I'm pretty sure you'll find the combo that you'll like.

http://www.youtube.com/watch?v=a2i8H_MZ3xk
http://www.youtube.com/watch?v=k6pvKfpkLLY&feature=related
 
0

03stangvert

New Member
Apr 11, 2007
17
0
0
Versailles Kentucky
Jan 27, 2008
#3
  • Jan 27, 2008
  • #3
Thanks....

Thanks for the reply and videos....nice car also....
 

fobra559

At least it's more erect and not floppy anymore.
Nov 1, 2007
721
0
0
Lindsay, CA
Jan 27, 2008
#4
  • Jan 27, 2008
  • #4
No problem man. Thanks for the compliment. Have you got an idea of what you want as far as the exhaust set-up?
 
M

mineralsnake

New Member
Jan 24, 2008
4
0
0
Jan 28, 2008
#5
  • Jan 28, 2008
  • #5
03stangvert said:
I just recently purchased a black '03 Cobra Convertible that is bone stock. I sold an '03 GT convertible which had Flowmaster 40 series after-cat and a MAC O/R H-pipe. The GT sounded good outside but, it had the dreaded "drone" sound inside the car if any knows what I mean by that (like a humming noise). Any suggestions on which brand of aftercat and mid pipe to use and whether to go with an X or H pipe. I'm kind of leaning toward Magnalfow or Bassani. I'm looking for a good deep rumble at idle and the raspiness under throttle. Any suggestions would be greatly appreciated!!!

Click to expand...
Congrats on the car. I have stingers on my 03 too. I have no other exhaust mods yet...and it still sounds sick!
 

fobra559

At least it's more erect and not floppy anymore.
Nov 1, 2007
721
0
0
Lindsay, CA
Jan 29, 2008
#6
  • Jan 29, 2008
  • #6
mineralsnake said:
Congrats on the car. I have stingers on my 03 too. I have no other exhaust mods yet...and it still sounds sick!
Click to expand...

Ever think about getting a o/r x or h pipe?
 

BennyBlown2v

New Member
Dec 9, 2004
1,233
1
0
Carmel, INdiana
Jan 29, 2008
#7
  • Jan 29, 2008
  • #7
Stingers are CRAZY loud with o/r pipe! Mine were bad enough I swapped BACK to a magnaflow cb LOL My favorite sound to date is Magnaflow CB with o/r X pipe, and longtubes to mellow it out.

If you want a performance gain as well, and don't mind the install time/difficulty/cost then pickup a set of quality longtubes like Kooks and an o/r x-pipe.
 

fobra559

At least it's more erect and not floppy anymore.
Nov 1, 2007
721
0
0
Lindsay, CA
Jan 29, 2008
#8
  • Jan 29, 2008
  • #8
I was assuming he didn't mind the noise Did you have a o/r x or h? Oh and do you have a sound clip of your old set up with the stingers and o/r pipe?
 
B

big power

New Member
Jan 20, 2007
5
0
0
bay area-sf, ca
Jan 29, 2008
#9
  • Jan 29, 2008
  • #9
very nice I would go with bassani cat & x pipe then go with hooker long tube or bassani equal heads depending what you want to do in the future .I went with the longtubes but later i went with twin turbo and lost some good money. i have bassani x, cat, and a k&n and got it dynoed made 420rwhp stock was 353 rwhp and it is f-----g loud It is the loudest I think and heard go to youtube or putfile.com . you can go to rpm or lfp,www.bieberfever.com.com nice sale job well done welcome
 
U

Uncle Meat

Banned
Jun 13, 2002
0
1
0
Prattville, Alabama
Jan 30, 2008
#10
  • Jan 30, 2008
  • #10
JBA Shorty's + Magnaflow catted X-Pipe + Magnaflow Cat-Back = Right-Click Save-As

U.M.
 
0

03stangvert

New Member
Apr 11, 2007
17
0
0
Versailles Kentucky
Jan 30, 2008
#11
  • Jan 30, 2008
  • #11
Thanks guys for the responses...I'm leaning toward the Borla Stingers and an O/R X pipe...

Thanks again...
 
M

mineralsnake

New Member
Jan 24, 2008
4
0
0
Jan 30, 2008
#12
  • Jan 30, 2008
  • #12
fobra559 said:
Ever think about getting a o/r x or h pipe?
Click to expand...

Probably going to in near future. i will go with bassani SS o/r xpipe & headers
 
R

rrohrig

New Member
Oct 29, 2006
55
0
0
Cleveland, OH
Jan 31, 2008
#13
  • Jan 31, 2008
  • #13
I went with the Magnaflow O/R X pipe and Magnaflow Catback on my '03 thanks to U.M. suggestion. It is a pretty good setup, only complaint I have is that I think it sounds a little too ricey for me. I like the deep idle. I probably just need some headers to fix the problem though. Not a bad drone at all (compared to the Flowmasters on my old '98). But as far as I hear, the HP increase with the Magnaflow is second to none.
 

fobra559

At least it's more erect and not floppy anymore.
Nov 1, 2007
721
0
0
Lindsay, CA
Feb 1, 2008
#14
  • Feb 1, 2008
  • #14
mineralsnake said:
Probably going to in near future. i will go with bassani SS o/r xpipe & headers
Click to expand...

Nice, which headers are you planning on getting?
 
M

mikepol2

New Member
Jul 7, 2006
28
0
1
Pittsburgh, PA
Feb 1, 2008
#15
  • Feb 1, 2008
  • #15
I had the Flowmasters on my 97 Cobra and they were OK, but had Magnaflow catbacks on my 99 and now my 03 and they're AWESOME. Best sounding exhaust ever. Just loud enough and sounds low and burbly low, but even better around 4000 rpm. The sound clips on their website don't do justice to how good they sound in person.
 

fobra559

At least it's more erect and not floppy anymore.
Nov 1, 2007
721
0
0
Lindsay, CA
Feb 3, 2008
#16
  • Feb 3, 2008
  • #16
Snake99 said:
I had the Flowmasters on my 97 Cobra and they were OK, but had Magnaflow catbacks on my 99 and now my 03 and they're AWESOME. Best sounding exhaust ever. Just loud enough and sounds low and burbly low, but even better around 4000 rpm. The sound clips on their website don't do justice to how good they sound in person.
Click to expand...

Get a mid pipe and then it will sound even better
 
M

mrrob96fs

New Member
Sep 27, 2007
33
0
0
San Jose, CA
Feb 3, 2008
#17
  • Feb 3, 2008
  • #17
I also have the magnaflow catback and catted x-pipe and while it doesn't sound nearly as good as my 00 GT with flowmasters and MAC o/r prochamber... it also doesn't have the drone of death at 2500 rpm. I can also talk to people inside the Cobra without yelling. After all, I love the Cobra cause I can run deep into the 11's and still have factory air conditioning, leather seats, premium sound and it doesn't sound like an airplane!
 

shhak

New Member
Dec 4, 2006
109
0
0
Feb 3, 2008
#18
  • Feb 3, 2008
  • #18
o/r h pipe and Borla Stingers FTW!!!
 
A

AREJAY

Founding Member
Jul 2, 2002
83
0
6
Snohomish, Wa
Feb 6, 2008
#19
  • Feb 6, 2008
  • #19
Rule of thumb I generally use: Start at the tailpipe and work your way forward. Don't get overly hungup on horspower yet either. Torque improvements should come first before you go laying out bucks on intake systems, throttle kits etc.. Loose the 3:56 gears and go to 3:73's. Don't let any one talk you into 4:10's. They work great if you dont have a blower but with one, you use up your horsepower real quick. Also.. Don't go putting some mega buck tire and wheel set on yet until you put a lowering kit on.
 

BennyBlown2v

New Member
Dec 9, 2004
1,233
1
0
Carmel, INdiana
Feb 6, 2008
#20
  • Feb 6, 2008
  • #20
http://youtube.com/watch?v=3SYOgbmtNRo -- 2v with borla stingers, lontubes, and o/r x pipe.

http://youtube.com/watch?v=CJr9yifbAHg -- 4v w/ FRPP shorties, o/r x-pipe, and borla stingers. You might not be able to hear the cobra much over the LS1's tho...lol
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

G
Quiet my 2015 GT on the cheap
  • gsrblack
  • Feb 12, 2025
  • 2015 - 2023 (S550) Mustang -General/Talk
Replies
6
Views
781
2015 - 2023 (S550) Mustang -General/Talk Apr 16, 2025
gkomo
A
2001 Mustang GT, scorched metal smell and noise from trans/diff?
  • AndyE2255
  • Dec 1, 2025
  • SN95 4.6L Mustang Tech
Replies
4
Views
465
SN95 4.6L Mustang Tech Dec 28, 2025
gkomo
SN95 Desktop 363 Engine Combination - Looking for input
  • WhiteCobra95
  • Sep 8, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 6, 2025
Habu135
For Sale 94 Cobra 408w AOD Project For Sale
  • Labora
  • Oct 11, 2024
  • SN95 Mustangs For Sale (1994-04)
Replies
1
Views
1K
SN95 Mustangs For Sale (1994-04) Apr 7, 2025
Labora
Progress Thread Giving an abandoned 88 GT project a new chance at life
  • jaketractor
  • Jan 9, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
27
Views
2K
Fox 5.0 Mustang Tech Jul 20, 2025
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SVT Tech Forum
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?