• Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-

Any trans companies sell race 3650 direct-replacement trans>!?

  • Thread starter Thread starter Undisputed
  • Start date Start date Jun 21, 2010

Undisputed

New Member
Dec 4, 2009
306
0
0
Westchester County NY
Jun 21, 2010
#1
  • Jun 21, 2010
  • #1
My car (just around the 500 RWHP mark, dyno tune in 2 weeks) with slicks and skinnies and a spec stage 2+ clutch and flywheel, strictly on the street has made the 3rd gear syncro fail, and the second, although only makes noise occasionally, def. going to be the next victim!! Any aftermarket fully built drop-in trans available? next year with more boost and the Brenspeed 302 the car will bein the 600+ RWHP area, I will need a trans that can survive a 10 second or better daily drive/track car/road race/auto-x... I dont mind spending a few thousand $$$, but I need it to last a few years/miles!! Thanks in advance if anyone knows of anything...
 

Undisputed

New Member
Dec 4, 2009
306
0
0
Westchester County NY
Jun 21, 2010
#2
  • Jun 21, 2010
  • #2
ALSO....

can I use a pre-05 3650 Built trans and get rid of the HORRIBLE remote shifter? There must be some way to get a real shifter, actually bolted to the trans not the body in this car!!! ???
 
B

Big Large

New Member
Dec 29, 2009
47
0
0
mechanicsville, va
Jun 21, 2010
#3
  • Jun 21, 2010
  • #3
i cant remember the site i saw it on. but someone makes a viper spec t56 swap kit with everything you need to do the tranny swap including the tranny for like 5400 i think. rated at over 800hp. google t56 mustang tranny swap and see what ya find
 
B

Big Large

New Member
Dec 29, 2009
47
0
0
mechanicsville, va
Jun 21, 2010
#4
  • Jun 21, 2010
  • #4
blowbyracing.com has the viper spec t56 for 5499. d and d performance has a 6 speed kit rated at 700lb/ft torque for 4200
 
F

flounderlipps

New Member
Apr 4, 2006
24
0
0
Jun 22, 2010
#5
  • Jun 22, 2010
  • #5
Promotion Powertrain



ProMotion Powertrain
 

Undisputed

New Member
Dec 4, 2009
306
0
0
Westchester County NY
Jun 22, 2010
#6
  • Jun 22, 2010
  • #6
flounderlipps said:
Promotion Powertrain



ProMotion Powertrain
Click to expand...

That will work huh, and I'll have a real shifter bolted to the trans, lol, insteada the shifter bolted to the floor...i HATE THAT!! The dealer is giving me a brans new trans this week, I'm droppin it off 2night.. as soon as that one blows up, lol, i think it;s time for a real trans... anyone on here have or know sum1 that has any of these... I guess i'll go 6 speed.. as long as the 4th gear is 1.1, so i can still run 1/4 in 4th.. my 4th hits around 130 @ rev-limiter at 1.1 ratio...
 

dysan

New Member
Jan 1, 2005
24
0
0
Jun 22, 2010
#7
  • Jun 22, 2010
  • #7
Tremec plans on releasing the T-56 magnum for our cars 4th quarter of this year. Rated at 700 ft/lbs torque and no remote shifter. It will have a slip yoke though so you'll need to either modify your driveshaft or get a new one all-together.
 

Undisputed

New Member
Dec 4, 2009
306
0
0
Westchester County NY
Jun 22, 2010
#8
  • Jun 22, 2010
  • #8
dysan said:
Tremec plans on releasing the T-56 magnum for our cars 4th quarter of this year. Rated at 700 ft/lbs torque and no remote shifter. It will have a slip yoke though so you'll need to either modify your driveshaft or get a new one all-together.
Click to expand...

Yup, this is the one im waiting for... im hoping the 1-4 gears will be close to our stock 3650, right now my car can pass 130mph in 4th with 3.73's, and my tire size before the rev-limiter @ 6,600 rpms, thats a perfect top of 4th, 135mph is good for a high 10 second pass.. i know i'll not have to shift out of 4th into an overdrive if they keep the 1.1 4th gear ratio in that 6 speed!!!
 
B

Big Large

New Member
Dec 29, 2009
47
0
0
mechanicsville, va
Jun 22, 2010
#9
  • Jun 22, 2010
  • #9
4th is 1:1 5th is .82 and 6th is .68
 
You must log in or register to reply here.

Similar threads

Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
3K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
A
Engine Turbo 5.0 Mustang bad misfire at WOT
  • AwxyMoron
  • Apr 3, 2021
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
51
Views
9K
Fox 5.0 Mustang Tech May 5, 2021
a91what
M
Progress Thread Monkeybutt2000's 89 vert build thread- 408w build in progress
  • Monkeybutt2000
  • Apr 4, 2020
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 20 21 22
Replies
437
Views
68K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 20, 2026
2Blue2
  • Locked
“Doing stuff the wrong way for the right reasons”: A related stupid story.
  • CarMichael Angelo
  • Apr 26, 2020
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
4K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 27, 2020
a91what
K
Project Ideas (2006 S197)
  • Kitsune187
  • Apr 22, 2019
  • 2005 - 2014 S-197 Mustang -General/Talk-
Replies
0
Views
1K
2005 - 2014 S-197 Mustang -General/Talk- Apr 22, 2019
Kitsune187
K
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?