Anybody tried the ACCUFAB AFPR ?

[Stangfreak95]

I'm at the point where I'll be dynotuning the car soon, so I'll need an adj. fuel pressure regulator. I know the best one out there is the Kirban but it doesnt have that "port" for you to connect a gauge directly on it. My shraeder valve spot on the fuel rail is already taken with the nitrous line, so if I can avoid putting another fitting there, I will. I just noticed that ACCUFAB makes an AFPR and it has a port for a gauge as well. I know that accufab usually makes good product but I'd like to have some feedback before I buy it. Anybody tried or heard stuff about the Accufab adj. fuel press. reg ?

 

[Grn92LX]

I have the accufan FPR. No problems after 3 years with it! Using a FPR to tune is sometimes a bandaid fix and sometimes it's only temporary until the eec adapts.

 

[Stangfreak95]

I have the accufan FPR. No problems after 3 years with it! Using a FPR to tune is sometimes a bandaid fix and sometimes it's only temporary until the eec adapts.

Thanks

I dont really have problems right now, its just that I assume that at the dyno, the tech will be playing with fuel pressure and timing. I've never been to one. IMO It would be worthless to try to tune the car with stock fuel pressure regulator.