Anyone blow up an 05 with boost or Juice?

eric n · Jul 29, 2005

The title says it all. I have heard several people express hesitation (due to the rings) about putting any form of unnatural aspiration on these. There have got to be a hundred or so boosted 05's running around. Many putting down overf 450 rwhp. Any Kaboooooms so far?

Who is running boost and has over a thousand miles boosted?

Who has made more than 10 passes boosted?

I know it's a little early, but have there yet been any EXTERNAL COMBUSTION engines???

subzero05 · Jul 29, 2005

418 at the tire and 387 torque with my vortech kit and no issues whatsoever at this point.It is an awesome kit and 3k miles with the kit on it

gp001 · Jul 30, 2005

eric n said:
The title says it all. I have heard several people express hesitation (due to the rings) about putting any form of unnatural aspiration on these. There have got to be a hundred or so boosted 05's running around. Many putting down overf 450 rwhp. Any Kaboooooms so far?

Who is running boost and has over a thousand miles boosted?

Who has made more than 10 passes boosted?

I know it's a little early, but have there yet been any EXTERNAL COMBUSTION engines???

Eric,
Nice to see another "Classics" member roaming the 05 section.

Here is a link that you may find interesting.

WARNING TO ANYONE FOLLOWING THE LINK: cc.com is not your usual forum. The knowledge base and intelligence level found there is very high. They do not play around there, and they do not tolerate some of the silliness that goes on here on SN. If you do get brave enough to register to post here are some tips: READ THE RULES! READ THE REQUIRED READING. POST ACCORDING TO THE GUIDLINES! They will humiliate/ban you like a Killer Whale playing with a wounded seal before it eats it

http://corner-carvers.com/forums/showthread.php?t=19513&page=1&pp=40&highlight=05+mustang

bigcat · Jul 30, 2005

gp001 said:
Eric,
Nice to see another "Classics" member roaming the 05 section.

Here is a link that you may find interesting.

WARNING TO ANYONE FOLLOWING THE LINK: cc.com is not your usual forum. The knowledge base and intelligence level found there is very high. They do not play around there, and they do not tolerate some of the silliness that goes on here on SN. If you do get brave enough to register to post here are some tips: READ THE RULES! READ THE REQUIRED READING. POST ACCORDING TO THE GUIDLINES! They will humiliate/ban you like a Killer Whale playing with a wounded seal before it eats it

http://corner-carvers.com/forums/showthread.php?t=19513&page=1&pp=40&highlight=05+mustang

those guys know every detail about everything.....they look into the issues a little more indepth than around here....

05canuck · Jul 30, 2005

Awesome site...

fin1 · Jul 30, 2005

Over 1000 miles @ 434rwhp.

lostsoul · Jul 30, 2005

They know tons of info.. but not much on 05 mustangs.. there are many boosted 05s out there and I hit forumes and nothing about blow engines.. I heard a clutch needs to be replaced when getting to 500hp.. but thats a no brainer.. I have a ait and I'm boosting and so far no issues.. I believe if its 420-450 rwhp things will be fine.... with a good tune.. I'll let other guess and say it wont work while I blow past people on the roads ;-)

gp001 · Jul 30, 2005

lostsoul said:
They know tons of info.. but not much on 05 mustangs.. there are many boosted 05s out there and I hit forumes and nothing about blow engines.. I heard a clutch needs to be replaced when getting to 500hp.. but thats a no brainer.. I have a ait and I'm boosting and so far no issues.. I believe if its 420-450 rwhp things will be fine.... with a good tune..

Did you read the same thread? The guy starting the thread was tearing down a 3v to see what it could handle and several other poster actually work for Ford engineering (and some directly on the Mustang project). Sees like they had very specific info, especially given the date of te thread (Oct 04).

lostsoul said:
I'll let other guess and say it wont work while I blow past people on the roads ;-)

Let's just hope that statement doesnt turn out to have a dual meaning

lostsoul · Jul 31, 2005

maybe he should have spent less time tearing apart the engin and try to put on a SC and run some test to really find out if it can boost.. ;-) since the post is a little old, then by now he must have seen he is mistaken.. maybe I should join that site and to a follow up =0)~

btw:.. I think there is a higher chance of me wrapping this car around a tree before the engin goes.. haha.

gp001 · Jul 31, 2005

lostsoul said:
maybe he should have spent less time tearing apart the engin and try to put on a SC and run some test to really find out if it can boost.. ;-) since the post is a little old, then by now he must have seen he is mistaken.. maybe I should join that site and to a follow up =0)~

btw:.. I think there is a higher chance of me wrapping this car around a tree before the engin goes.. haha.

Well, if you knew much about that site you would know that the poster has lots of experience building boosted machines. Even the guys in the know (racing SC'd 05s) are saying they are unsure of the 3v's ability to handle it.

I hope it can, because it would really keep the mustang selling well and help boost (no pun intended) the aftermarket (in all areas) for the new platform.

But I think I'll stick to my plan of building a stout na motor with new internals

Motorhead6T5 · Aug 2, 2005

I haven't heard of one blown up motor since the seama show when they were running superchargers without a tune. Not one,and I browse most mustang sites regularly. I think we won't see any till people start changing out pulleys from the base kits.

turrizt · Aug 2, 2005

yea, i think i actually will wait till the spring to boost mine ... if no blow ups by then, maybe the first round of kits are relatively safe or better yet, the 05 mustang is very strong...

1ba96gt · Aug 4, 2005

Motorhead6T5 said:
I haven't heard of one blown up motor since the seama show when they were running superchargers without a tune. Not one,and I browse most mustang sites regularly. I think we won't see any till people start changing out pulleys from the base kits.

They have been blown. All the shops that build them up don't usually like to state all over the internet that they've blown engines. I know of at least 3 that have gone. 2 on the juice, 1 on boost. I don't know the what horsepower they were at, but it was not extreme. These engines aren't as bad as first thought, but they sure aren't an 03/03 cobra block either.

383ss · Aug 4, 2005

I'm not going to name names, but a local tuner I know blew one up on the 2nd dyno pull with a s/c. 1st pull was around 450rwhp

1ba96gt · Aug 4, 2005

383ss said:
I'm not going to name names, but a local tuner I know blew one up on the 2nd dyno pull with a s/c. 1st pull was around 450rwhp

Yea I'm not going to name names either. It was in no way the peoples fault that they blew them up, they were just testing limits of these engines.

delurker · Aug 4, 2005

gp001 said:
But I think I'll stick to my plan of building a stout na motor with new internals

Motorhead6T5 · Aug 5, 2005

1ba96gt said:
They have been blown. All the shops that build them up don't usually like to state all over the internet that they've blown engines. I know of at least 3 that have gone. 2 on the juice, 1 on boost. I don't know the what horsepower they were at, but it was not extreme. These engines aren't as bad as first thought, but they sure aren't an 03/03 cobra block either.

Thank god I didn't order the procharger kit yet

chunkachunk · Aug 5, 2005

Motorhead6T5 said:
Thank god I didn't order the procharger kit yet

you're right, you ordered the blowcharger kit from ur boyfriend

eric n · Aug 5, 2005

chunkachunk said:
you're right, you ordered the blowcharger kit from ur boyfriend

What exactly is the point of this antagonism. I've only seen a couple of your posts, but you appear to be on for no other reason but to harass people. The man was simply happy he hadn't invested in an after market kit which MIGHT and MIGHT NOT harm his engine. Seems reasonable.

delurker · Aug 5, 2005

This should explain, eric n.

http://forums.stangnet.com/showthread.php?t=569789

Anyone blow up an 05 with boost or Juice?

eric n

subzero05

New Member

gp001

bigcat

start with the upper hole, and if more traction is

05canuck

Member

fin1

New Member

lostsoul

New Member

gp001

lostsoul

New Member

gp001

Motorhead6T5

New Member

turrizt

New Member

1ba96gt

New Member

383ss

New Member

1ba96gt

New Member

delurker

New Member

Motorhead6T5

New Member

chunkachunk

Banned

eric n

delurker

New Member

Similar threads

Anyone blow up an 05 with boost or Juice?

New Member

start with the upper hole, and if more traction is

Member

New Member

New Member

New Member

New Member

New Member

New Member

New Member

New Member

New Member

New Member

Banned

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency