Anyone done the 351W swap? I need some info.

Bigcat11

New Member
Jun 22, 2020
3
0
1
40
Ky
Has anyone done this swap to a carbureted 351W? Here’s where I’m at the car was a v6 when I pulled the engine out there’s a ton of wires lol. So I assume I can just use the harness for the starter and alternator and do away with the rest? I’m no electrician by any means, so I’d love to hear some advice from people who have knowledge about these computerized vehicles. Also if there’s someone who has done this swap what type of headers did you use?
Thanks
 
  • Sponsors(?)


Thread starter Similar threads Forum Replies Date
C 94 351W EFI has anyone done this 1994 - 1995 Specific Tech 8
str8stang036 Anyone done 2 to 4 bolt main conversion on 351w? Fox 5.0 Mustang Tech 2
bdazzstang Has anyone ever done a swap to a 351W from a 302 on a fox body? Fox 5.0 Mustang Tech 3
R 1998 v-6 engine in a 1966 mustang does anyone know if this has been done 1965 - 1973 Classic Mustangs -General/Talk- 15
Matt01 Has anyone done brembo f50 calipers on GT500 OEM rotors? 1996 - 2004 SN95 Mustang -General/Talk- 0
B Fox Lx to gt ground effect conversion??? Has anyone done one ? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 10
Zero_chance Has anyone done the auto10 swap into a 17 or older yet? 2015+ Specific Tech 0
E Fuel 74 hatch anyone done a Fuel cell? 1974 - 1978 Mustang II Talk & Tech 5
Trevin Dry Coolant System Pressure Test Had Anyone Done This? Fox 5.0 Mustang Tech 2
S Essex V6 Into Vintage Mustang, Anyone Done? Classic Mustang Specific Tech 7
dradis Grill Fog Lights In 2010-12 V6. Anyone Done It? 2005 - 2014 S-197 Mustang -General/Talk- 0
jastang 2.8l Kenne Bell Mammoth On 97 Gt. Anyone Done It? 1996 - 2004 SN95 Mustang -General/Talk- 5
Codydubb Broken slip yoke inside trans...Anyone ever done this? Fox 5.0 Mustang Tech 12
SlammedGT Has anyone ever done a 93 Cobra body kit on a 4 eye? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 13
bdazzgt has anyone done/seen this done? Fox 5.0 Mustang Tech 10
281pony Leather seat repair, anyone had this done? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 1
281pony Smoked 85 GT tails, anyone done this? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 6
Mustanglvr2006 Anyone done Business with North American Tuning? 2005 - 2014 S-197 Mustang -General/Talk- 7
1 Bedlining underside, anyone done this? Classic Mustang Specific Tech 14
oldtexasdog Anyone out there done a gear change themselves? 2005 - 2014 S-197 Mustang -General/Talk- 8
Undisputed Anyone done cams yet in a 3V 4.6?? Preference>?? 2010 - 2014 Specific Tech 27
99FiveOh Extrude Hone, anyone ever have it done? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 5
1 Has anyone done a Taurus Fan install on classic Mustang Classic Mustang Specific Tech 4
A HELP put a 97 in my 95 V6. no fire...... has anyone done this swap? SN95 V6 Mustang Tech 2
281pony Need paint and bodywork done, anyone? Regional Forums and Event Information 18
90lxcoupe Anyone done this to a clutch cable?? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 6
Intercoledc6 Programming Remote Anyone done this SN95 4.6L Mustang Tech 13
Tom95gt Has anyone ever done anything with DFG? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 11
Mustang5L5 3-2 Conversion - Has anyone done it this way?? Fox 5.0 Mustang Tech 6
S anyone heard of this being done?? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 7
4 Anyone ever done a fuel pump kill switch? 2.3L (N/A & Turbo) Tech 0
90silverstang Has anyone done business with T and L Engine Development in NC 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 3
90silverstang Has anyone done business with T and L Engine Development in NC 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 0
J Has anyone here done this? 1996 - 2004 SN95 Mustang -General/Talk- 15
F Has anyone done an EDIS 8 conversion? Classic Mustang Specific Tech 9
Mustang5L5 Has anyone done LED's in the license plate sockets or Reverse lights? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 25
F Anyone done smaller aftermarket pulley and CAI with tune on Roush SC ? 2005 - 2009 Specific Tech 1
99GTNOOB HAS ANYONE DONE THIS???? 1996 - 2004 SN95 Mustang -General/Talk- 22
Pakrat Anyone do driveways or had one done recently? 1965 - 1973 Classic Mustangs -General/Talk- 13
JDS68Stang Has anyone done business w/ this guy? (steering box) Classic Mustang Specific Tech 2
oz Putting gauges just below radio - anyone else done this? Fox 5.0 Mustang Tech 25
D Anyone done a 9" swap with 11" drums ? Classic Mustang Specific Tech 6
S Anyone done HID Kit? Or PIAA Bulbs ? ------------- 2005 - 2014 S-197 Mustang -General/Talk- 11
B Has anyone ever done this for a 12 volt source? Classic Mustang Specific Tech 5
S Anyone know if this can be done? 1994 - 1995 Specific Tech 5
0 Anyone done some independent before vs. after dynos for the trick flow manifold yet? 1996 - 2004 SN95 Mustang -General/Talk- 15
The Green GT So has anyone ver done this??? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 0
Flavadave4 Is anyone going to have a model done for the buildoff? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 23
68stang351 Foghorn, Edbert, anyone else who's done an Autometer install... Classic Mustang Specific Tech 13
E Anyone Ever Done This? 1994 - 1995 Specific Tech 12
Similar threads