• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

anyone else's break? Automatics

  • Thread starter Thread starter mijo_latino
  • Start date Start date Jun 19, 2005
  • 1
  • 2
Next
1 of 2 Next Last
M

mijo_latino

Active Member
Apr 16, 2004
179
1
29
Canton, Michigan
Jun 19, 2005
#1
  • Jun 19, 2005
  • #1
Around Friday i noticed when i parked, the small strip of plastic that has the P in the shifter(i guess that's not what its called ) snapped in 2. I took the console apart and tried to jb weld it together but it didn't hold for long. Looks ghetto with the gaping hole there and always saying in drive.
What did you guys do to fix this? Junkyard search for the entire piece?
Even know what im talking about? i hope this is clear.
 

posm6s

New Member
Sep 24, 2003
144
0
0
Eddyville, KY
Jun 19, 2005
#2
  • Jun 19, 2005
  • #2
Trade the Auto in for a 5-speed.
 
2

2001sleeper

New Member
Nov 22, 2004
136
0
0
Jun 19, 2005
#3
  • Jun 19, 2005
  • #3
posm6s said:
Trade the Auto in for a 5-speed.
Click to expand...
so he can get raped by autos at the dragstrip
btw-this part has not broke on mine........yet
 

BlackenedSVT

Active Member
Jan 18, 2004
1,841
7
38
New Jersey
Jun 19, 2005
#4
  • Jun 19, 2005
  • #4
2001sleeper said:
so he can get raped by autos at the dragstrip
btw-this part has not broke on mine........yet
Click to expand...


What are you kidding me man? The only auto thats going to be a 5spd is maybe one with a shift kit. My 98GT was an auto, and i'll never own another auto stang again

"Give me 5spd or give me death"
 
J

jimfitzgerald

New Member
Apr 11, 2001
6,672
0
0
Jun 19, 2005
#5
  • Jun 19, 2005
  • #5
UDTBadkarma said:
What are you kidding me man? The only auto thats going to be a 5spd is maybe one with a shift kit. My 98GT was an auto, and i'll never own another auto stang again

"Give me 5spd or give me death"
Click to expand...
You will when you get tired of being slow.
 

Dark Knight GT

I can't get it up......ok that didn't sound right.
May 26, 2003
3,653
2
56
Ozark, Missouri
Jun 19, 2005
#6
  • Jun 19, 2005
  • #6
mijo_latino said:
Around Friday i noticed when i parked, the small strip of plastic that has the P in the shifter(i guess that's not what its called ) snapped in 2. I took the console apart and tried to jb weld it together but it didn't hold for long. Looks ghetto with the gaping hole there and always saying in drive.
What did you guys do to fix this? Junkyard search for the entire piece?
Even know what im talking about? i hope this is clear.
Click to expand...
Hmmm. Contact Randy Stinchcomb over at the Ford parts section of the Modular Depot Forum. He should be able to help you get the parts you need come tomorrow.

www.modulardepot.com

Just click on the forums tab, scroll to where you see "Ford Parts", go in there, and ask Randy what you need. He'll take care of you.
 

BlackenedSVT

Active Member
Jan 18, 2004
1,841
7
38
New Jersey
Jun 20, 2005
#7
  • Jun 20, 2005
  • #7
jimfitzgerald said:
You will when you get tired of being slow.
Click to expand...


Not much skill required in driving an auto. Def not any fun
 
J

jimfitzgerald

New Member
Apr 11, 2001
6,672
0
0
Jun 20, 2005
#8
  • Jun 20, 2005
  • #8
UDTBadkarma said:
Not much skill required in driving an auto. Def not any fun
Click to expand...
Actually, you're wrong on both counts when it's a 10 second auto with a manual valve body.
 

BlackenedSVT

Active Member
Jan 18, 2004
1,841
7
38
New Jersey
Jun 20, 2005
#9
  • Jun 20, 2005
  • #9
jimfitzgerald said:
Actually, you're wrong on both counts when it's a 10 second auto with a manual valve body.
Click to expand...

I said there is NOT MUCH, not there is NO skill involved. And you're telling me there is MORE skill in driving that than a manual??? And we aren't talkin about a 10 second car here bud. How many of us on this forum have even hit 10s I'm talkin shot for shot, auto vs manual. Not completely modified to a $50k race car or the car in your avatar...

Good for you if you like automatics, but no thanks.
 
M

mijo_latino

Active Member
Apr 16, 2004
179
1
29
Canton, Michigan
Jun 20, 2005
#10
  • Jun 20, 2005
  • #10
lol, wow. Didn't forsee this be an auto/manuel debate.
Thanks DarkNight, I 'll check into that. I remember reading some stuff over there.

I know what you guys mean about the auto, the shifts are slow and a bit jerky, maybe due to aging, lol. Never driving decent car with a stick, other then my uncles svt focus,(which he got rid of.) and countless trucks. If the tranny gives out, a complete motor/tranny swap will be in place.
 
J

jimfitzgerald

New Member
Apr 11, 2001
6,672
0
0
Jun 20, 2005
#11
  • Jun 20, 2005
  • #11
UDTBadkarma said:
I said there is NOT MUCH, not there is NO skill involved. And you're telling me there is MORE skill in driving that than a manual??? And we aren't talkin about a 10 second car here bud. How many of us on this forum have even hit 10s I'm talkin shot for shot, auto vs manual. Not completely modified to a $50k race car or the car in your avatar...

Good for you if you like automatics, but no thanks.
Click to expand...
How much skill does it take to step on a clutch? That's the only difference. I'm just saying don't bad mouth an automatic for being slow. Most of them will beat your 5 speed at the track. A fast automatic is much more fun and challenging than a slow 5 speed anyday. Are you even running 13's?
 

BlackenedSVT

Active Member
Jan 18, 2004
1,841
7
38
New Jersey
Jun 20, 2005
#12
  • Jun 20, 2005
  • #12
jimfitzgerald said:
How much skill does it take to step on a clutch? That's the only difference. I'm just saying don't bad mouth an automatic for being slow. Most of them will beat your 5 speed at the track. A fast automatic is much more fun and challenging than a slow 5 speed anyday. Are you even running 13's?
Click to expand...


First off, what does me running 13s have to do with anything???
Second off, I haven't been to the track yet so I will let you know when I go. And im am not ONLY talking about the drag strip here. Taking a 5spd around a road-course or "drifting" (which I dont care for, but never the less...) requires quite a bit of skill...

ALSO, lets take a stock form of my car, or even my car with my current mods. Now lets take it to the track, BUT PRETEND ITS AN AUTOMATIC. Ok now I make a few passes down the track, and you'll notice the times are relatively close to each other. Hence the automatic trans. NOW lets take my exact car but WITH my 5psd trans, and lets take a few passes down the track, now (lets say) i make a 14.5, a 14.2 and then a 13.9 sec pass on my three passes. Then lets say you jump in MY car and make a 13.2 1/4 pass. Are you saying there is no skill involved? You just (hypothetically) dropped a second off my 1/4 because of your skill in driving......
 

Dark Knight GT

I can't get it up......ok that didn't sound right.
May 26, 2003
3,653
2
56
Ozark, Missouri
Jun 20, 2005
#13
  • Jun 20, 2005
  • #13
I have to agree with Jim. I'de put my automatic anyday up against a five speed with equal power.
 

foncarelli

Member
Jan 7, 2003
156
1
18
Jun 20, 2005
#14
  • Jun 20, 2005
  • #14
All i have to say is: If i raced a factory 04 Cobra.......You better know how to drive it.
 

OUR01GT

New Member
Mar 31, 2005
121
0
0
EAST CENTRAL OHIO
Jun 20, 2005
#15
  • Jun 20, 2005
  • #15
I also favor the 4R70W over the 5 speed. I can't add anything more to that other than what has already been said.
 
2

2001sleeper

New Member
Nov 22, 2004
136
0
0
Jun 20, 2005
#16
  • Jun 20, 2005
  • #16
thanks for jumping in on this debate guys, some people don't understand the possibilities of an automatic.
and for sake of arguement, after I put my new TC and cooler in, on the same day i went from a 13.9 to a 13.4. This was before any of the big mods in my sig.
 
K

Kilgore Trout

Fried or Broiled ?
10 Year Member
Mar 30, 2005
4,749
95
134
Jun 20, 2005
#17
  • Jun 20, 2005
  • #17
A wise Stangnet poster does not correct jimfitzgerald... He knows a little bit about which he speaks

Anyone on the thread topic you will be able to get that piece and it probably will not cost much. Since you say you already got to the old one to glue it up, you have the hard part mastered already which is getting to the stupid part.
 
2

2001sleeper

New Member
Nov 22, 2004
136
0
0
Jun 20, 2005
#18
  • Jun 20, 2005
  • #18
Kilgore Trout said:
A wise Stangnet poster does not correct jimfitzgerald... He knows a little bit about which he speaks

Anyone on the thread topic you will be able to get that piece and it probably will not cost much. Since you say you already got to the old one to glue it up, you have the hard part mastered already which is getting to the stupid part.
Click to expand...
his car is inspiration
 
J

jimfitzgerald

New Member
Apr 11, 2001
6,672
0
0
Jun 20, 2005
#19
  • Jun 20, 2005
  • #19
Thanks guys. I just get tired of hearing people bash automatics. I have owned a lot of cars including 4 speeds, 5 speeds, and automatics. In my opinion, it's not the tranny that matters, but the power. Any low powered, slow car is boring regardless of the tranny. A fast, high powered car is fun and a "hand full" regardless of the tranny. Quite frankly, the fun of rowing through the gears ceased to be fun for me a long time ago, on the street or at the track. Really, for anything much over 500 rwhp, you need an automatic, in my opinion.
 

BlackenedSVT

Active Member
Jan 18, 2004
1,841
7
38
New Jersey
Jun 20, 2005
#20
  • Jun 20, 2005
  • #20
jimfitzgerald said:
Thanks guys. I just get tired of hearing people bash automatics. I have owned a lot of cars including 4 speeds, 5 speeds, and automatics. In my opinion, it's not the tranny that matters, but the power. Any low powered, slow car is boring regardless of the tranny. A fast, high powered car is fun and a "hand full" regardless of the tranny. Quite frankly, the fun of rowing through the gears ceased to be fun for me a long time ago, on the street or at the track. Really, for anything much over 500 rwhp, you need an automatic, in my opinion.
Click to expand...


No no no, you guys are missing the point. BY NO MEANS AM I BASHING AUTOMATICS. Personally, I dont understand how you can like them, I'm just arguing that there is more SKILL required in driving a manual. This is getting beat to death though, so i'll stop and all you automatic guy sare getting testy
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

M
Progress Thread mnky99 2001 V6 evap core, ac compressor, heater core replacement
  • mnky99
  • Sep 5, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
608
1996 - 2004 SN95 Mustang -General/Talk- Sep 5, 2025
mnky99
M
E
Finished my Fox Hydroboost Install - Tips
  • Engineer Duane
  • Apr 9, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 5, 2025
Engineer Duane
E
J
Progress Thread Family member 1989 GT- Backstory and updates
  • JRC99
  • Apr 19, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 26, 2025
JRC99
J
Engine Today I found air leaks on 2 different IAC's which caused erratic idle issues.
  • CAMTWO1070
  • Oct 15, 2022
  • Fox 5.0 Mustang Tech
Replies
2
Views
1K
Fox 5.0 Mustang Tech Oct 15, 2022
General karthief
SN Mustang Magnum T56 swap
  • revhead347
  • May 24, 2024
  • 1994 - 1995 Specific Tech
Replies
15
Views
7K
1994 - 1995 Specific Tech Jun 28, 2026
GearHeadGuy
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?