• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Anyone gone to this Roadcourse?

  • Thread starter Thread starter RUNINAGT
  • Start date Start date Feb 14, 2007

RUNINAGT

Member
Oct 3, 2005
237
2
18
CHARLESTON S.C.
Feb 14, 2007
#1
  • Feb 14, 2007
  • #1
Some friends and I are considering going to this raceway in April. Iv'e never attended anything like this, I would love to try it.
Just wanted to know if any of ya attended this place, or something similiar. From what im told your car can be stock to run this place. It will cost $200.00 if we have 5 people or $225.00 with less. I guess I need too read more myself on the website but it was just presented to me this morning. I was told you just gotta have a newer helmet, long sleeves, and long pants. Car will go thru a brief tech inspection to make sure tires, brakes, suspension are good and you are not leaking any fluids.
Any info is welcome.
Does anyone know if I will be able to run my car with the spacers it has on it now for the wheels?? They are 1/4".
Here is the link to the site.
http://www.roeblingroad.com/track.html
If I cant run the spacers does someone have a set of wheels to loan me
 

duner

Mr. Warmth
Jul 21, 2003
1,756
3
0
Oregon
Feb 14, 2007
#2
  • Feb 14, 2007
  • #2
RUNINAGT said:
Some friends and I are considering going to this raceway in April. Iv'e never attended anything like this, I would love to try it.
Just wanted to know if any of ya attended this place, or something similiar. From what im told your car can be stock to run this place. It will cost $200.00 if we have 5 people or $225.00 with less. I guess I need too read more myself on the website but it was just presented to me this morning. I was told you just gotta have a newer helmet, long sleeves, and long pants. Car will go thru a brief tech inspection to make sure tires, brakes, suspension are good and you are not leaking any fluids.
Any info is welcome.
Does anyone know if I will be able to run my car with the spacers it has on it now for the wheels?? They are 1/4".
Here is the link to the site.
http://www.roeblingroad.com/track.html
If I cant run the spacers does someone have a set of wheels to loan me
Click to expand...

Couple of things.

HPDE/open track days are **** loads of fun. I've done 6 of them. This Saturday will be my seventh and the first one of the year.

You car should be fine. I'm not concerned about the spacers. I would be concerned about running the stock brakes. You may have some fade. You will need to be careful not to over heat the brakes.

I have the 5 lug conversion and ’98 Cobra brakes on the front. Using the twin piston PBR calipers help stopping distances and resist fading very well.

I’ve never been to that track but anytime you are on a road course, you will have fun.

Here's a couple of pics of me at Portland International Raceway.



 

DEFWISH

Member
Feb 25, 2006
87
0
8
Wichita, Ks
Feb 15, 2007
#3
  • Feb 15, 2007
  • #3
duner.. how'd you do against that subaru?
 

OonDeanisS

Founding Member
Jun 16, 2002
902
1
19
Danbury, CT
Feb 15, 2007
#4
  • Feb 15, 2007
  • #4
the picture tells all
 

RUNINAGT

Member
Oct 3, 2005
237
2
18
CHARLESTON S.C.
Feb 15, 2007
#5
  • Feb 15, 2007
  • #5
duner said:
Couple of things.

HPDE/open track days are **** loads of fun. I've done 6 of them. This Saturday will be my seventh and the first one of the year.

You car should be fine. I'm not concerned about the spacers. I would be concerned about running the stock brakes. You may have some fade. You will need to be careful not to over heat the brakes.

I have the 5 lug conversion and ’98 Cobra brakes on the front. Using the twin piston PBR calipers help stopping distances and resist fading very well.

I’ve never been to that track but anytime you are on a road course, you will have fun.

Here's a couple of pics of me at Portland International Raceway.
Click to expand...

Did you spin it at all?? I bet its gonna be fun. I found someone to loan a set of wheels to me if I need them. I called the guy I sold my old Pony's to, and he said sure if you need them let me know
I left a message with the contact person @ the track yesterday and as of now 10:20 AM Thursday no responce. His email didn't work either.
 

hemi_fan

Active Member
Apr 8, 2004
279
3
28
Ontario, Canada
Feb 15, 2007
#6
  • Feb 15, 2007
  • #6
RUNINAGT said:
Did you spin it at all?? I bet its gonna be fun. I found someone to loan a set of wheels to me if I need them. I called the guy I sold my old Pony's to, and he said sure if you need them let me know
I left a message with the contact person @ the track yesterday and as of now 10:20 AM Thursday no responce. His email didn't work either.
Click to expand...

how come ur running spacers anyway? If its to prevent rubbing at full-lock, then u could probably just remove them for the trackday, cuz u probably wont be at full lock on the course.
 

RUNINAGT

Member
Oct 3, 2005
237
2
18
CHARLESTON S.C.
Feb 15, 2007
#7
  • Feb 15, 2007
  • #7
hemi_fan said:
how come ur running spacers anyway? If its to prevent rubbing at full-lock, then u could probably just remove them for the trackday, cuz u probably wont be at full lock on the course.
Click to expand...

Had to use the spacer to clear the front struts, also the grease cap would knock out the center cap of the wheel. So had to use a 1/4" spacer to clear. I installed them on rear just to make car look even.
 

duner

Mr. Warmth
Jul 21, 2003
1,756
3
0
Oregon
Feb 15, 2007
#8
  • Feb 15, 2007
  • #8
OonDeanisS said:
the picture tells all
Click to expand...



They're multiplying

 

duner

Mr. Warmth
Jul 21, 2003
1,756
3
0
Oregon
Feb 15, 2007
#9
  • Feb 15, 2007
  • #9
DEFWISH said:
duner.. how'd you do against that subaru?
Click to expand...

That guy was pretty quick. His WRX was pretty modified and would spank me on the straights. My engine is stock and tired.
 

duner

Mr. Warmth
Jul 21, 2003
1,756
3
0
Oregon
Feb 15, 2007
#10
  • Feb 15, 2007
  • #10
RUNINAGT said:
Did you spin it at all??
Click to expand...

I didn't spin. So far I've kept it off the grass. this was a training event so safety is the top priority.

If possible, get an instructor or experienced person who knows the track to ride along with you. This will help you understand the safety aspects of the event and track. This is important. Once you've done at least one event with an instructor you will feel much more comfortable and safe out there.

Keith
 

RUNINAGT

Member
Oct 3, 2005
237
2
18
CHARLESTON S.C.
Feb 16, 2007
#11
  • Feb 16, 2007
  • #11
duner said:
I didn't spin. So far I've kept it off the grass. this was a training event so safety is the top priority.

If possible, get an instructor or experienced person who knows the track to ride along with you. This will help you understand the safety aspects of the event and track. This is important. Once you've done at least one event with an instructor you will feel much more comfortable and safe out there.

Keith
Click to expand...

Now I just gotta come up with all te $$$$ I guess I will put some better brakes on it before I go. IF I GO?????
Haven't spilled the news to the wife just yet
 
You must log in or register to reply here.

Similar threads

S
Help with window and possible engine
  • StefRena22
  • Jun 12, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
19
Views
842
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 21, 2025
Willybill32
3rd person help with a Chevy issue
  • LILCBRA
  • Feb 13, 2025
  • Other Auto Tech
Replies
11
Views
416
Other Auto Tech Apr 20, 2025
LILCBRA
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
45
Views
2K
1965 - 1973 Classic Mustangs -General/Talk- Feb 4, 2026
nickyb
95 Cobra: Composite intake spacer melted :(
  • ngiotta
  • Jun 9, 2021
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
9
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 10, 2021
revhead347
Suspension Want to lower vert, anyone run these tires/wheels with a lower? Will I rub?
  • 5ltr7up
  • Apr 11, 2022
  • Fox 5.0 Mustang Tech
Replies
8
Views
2K
Fox 5.0 Mustang Tech Jan 26, 2023
2000xp8
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?