Roush Anyone priced out what it would cost to make a saleen clone?

Sierra · May 27, 2003

Anyone priced out body pieces only to make a 99+ saleen clone out of a cobra. I do not care about engine plaque's or interior, just exterior.

Who has the best prices on kits or all of the saleen body kits?

jdub99 · May 28, 2003

Check out speedworx.com or haneymotorsports.com

The cost can very depending on how close you want the replica to be. If you just want the body kit and the wheels you would be looking at about $5000. If you do the suspension, blower, hood, exhaust... it can get pretty expensive. However, you can use substitutes for the last few items and get off cheaper with better performance.

i.e. - Magnaflow catback and x-pipe is much cheaper than the borla stuff from Saleen.

The suspension can be replaced with Maximum Motorsports stuff and H&R springs and you will have a better handling car that looks better (IMO).

Good luck...

SSOutlaw 2159 · May 28, 2003

More then its worth thats for sure. The money you spend could be a good down payment on a new one or close to it anyway.

LiquidCrew03 · May 29, 2003

5t???

Should be alout less then that

$1050 for the kit (front and rear fascias,side skirts, and all necessary screens and openings.

about $200 for saleen wing

$235 for Graphics

Grand total of 1485 without shiping costs. Then you have to pay someone to put them on and paint. ( or do it yourself). For just apperance looking at about 2500 in the end

jdub99 · May 29, 2003

Re: 5t???

Originally posted by LiquidCrew03
Should be alout less then that

$1050 for the kit (front and rear fascias,side skirts, and all necessary screens and openings.

about $200 for saleen wing

$235 for Graphics

Grand total of 1485 without shiping costs. Then you have to pay someone to put them on and paint. ( or do it yourself). For just apperance looking at about 2500 in the end

And wheels? And side scoops? and C-Pillars?

Plus prep and paint on the Saleen kit is not cheaop if you want it done right, plus the kit normally needs some touch up to get it to fit right.

There is another 2500 easily. Looking at about 5K.

LiquidCrew03 · May 29, 2003

what about the stalker kit??

Problie going on my 03 cobra. Let me know what ya think.

GNN60GT500 · May 29, 2003

Originally posted by jdub99
Check out speedworx.com or haneymotorsports.com

i.e. - Magnaflow catback and x-pipe is much cheaper than the borla stuff from Saleen.

...

Saleen doesnt use Borla anymore!!!

They have "made the switch"

Cory351 · Jun 2, 2003

I have a 96 Saleen clone bulit by Saleen. And I have a stack of bills from saleen for about $10,000. but It looks and runs just like a real S281.

Cory351 · Jun 2, 2003

I have a 96 Saleen clone bulit by Saleen. And I have a stack of bills from saleen for about $10,000. but It looks and runs just like a real S281.

Cory351 · Jun 2, 2003

I have a 96 Saleen clone bulit by Saleen. And I have a stack of bills from saleen for about $10,000. but It looks and runs just like a real S281.

SSOutlaw 2159 · Jun 2, 2003

I have a 96 Saleen clone bulit by Saleen. And I have a stack of bills from saleen for about $10,000. but It looks and runs just like a real S281

You just made my point. BTW do you have any pics of ya ride?

Head Paneer · Jun 3, 2003

Originally posted by Cory351
I have a 96 Saleen clone bulit by Saleen. And I have a stack of bills from saleen for about $10,000. but It looks and runs just like a real S281.

Will you clarify what you mean by “...built by Saleen”?

2K1GtfromSC · Jun 5, 2003

I have almost $10,000 in mine. That includs a series IV sc, but not Saleen wheels. I went with the 95' cobra R's for now, not sure if I'll get the 18" Saleen's.

Cory351 · Jun 6, 2003

My car was built at Saleen when they still did work on anyone's mustang

Sierra · Jun 9, 2003

Thanks for the input guys. And no Im not looking at buying a V6 Mustang and throwing a saleen body kit on it. I Just would like to have a fast car with the looks of saleen, and don't want to pay a premium for it at this point in my life...

I think I will wait till I pay off my cobra, and then either keep it and buy another cobra (probably wont happen) but I will probably sell the cobra and build up a 99 or 2001 cobra with a saleen kit.

Sierra · Jun 25, 2003

Okey guys that have saleen or saleen clones.

I have a few more questions:

What are some good aftermarket seats, they don't need to say saleen, but they need to have cushions and side bolsters, I do like the ford racing ones, are there any others that are like the ford racing type?

What exhaust does the 99-2001 saleen's have? IE: What Headers, what mid pipe, and what catback?

I would be replacing the midpipe with an off road version. I ask because someone said they "have made the switch" from borla, what do they use?

Also what are the largest wheels I can put on the back?

What are the largest tires I can put on the back?

2K1GtfromSC · Jun 26, 2003

have made the switch" from borla, what do they use?

I think they went with magnaflow or Bassani.

As far as exhaust I use Bassani O/R X-pipe & bassani cat back. I'm not sure what Saleen use but mine sounds bad @ss. I'll also be using JBA shorties after the Sreies IV install.

Wheels; Saleen uses 18x10 out back with a tire as big as 315's, maybe bigger

Santinas pony · Jun 26, 2003

Between the previous owner and our efforts, we have about $10,000 into our clone. We have duplicated just about everything and worked especially hard at grubbing and searching for correct badging too. My advise, unless you really like doing the work and don't have the downpayment, get the real thing. We are proud of our baby though and many Saleen owners have complimented on the car. see the pic link below:

Sierra · Jun 26, 2003

Santinas pony, I think I talked to you a while ago, and you sent me an email with a list of everything you purchased for your car. Your car looks great, I dont want to make an exact clone, but Exterior wise I want it the same.

Do you happen to still have that email in your outbox?
You had sent it to joseph.sierra@und.edu

Sierra · Jun 26, 2003

2 More questions

1: Does anyone know where I can order a saleen Extreme hood? Chicane no longer has them in stock

2: What is needed to convert over to saleen E center exhaust? Do you need the rear bumper and an extra 100 dollar upgrade or what? Thanks everyone.

Roush Anyone priced out what it would cost to make a saleen clone?

Sierra

jdub99

SSOutlaw 2159

LiquidCrew03

New Member

jdub99

LiquidCrew03

New Member

GNN60GT500

Cory351

New Member

Cory351

New Member

Cory351

New Member

SSOutlaw 2159

Head Paneer

2K1GtfromSC

Cory351

New Member

Sierra

Sierra

2K1GtfromSC

Santinas pony

Attachments

Sierra

Sierra

Similar threads

Roush Anyone priced out what it would cost to make a saleen clone?

New Member

New Member

New Member

New Member

New Member

New Member

Attachments

Similar threads

Privacy & Transparency

Privacy & Transparency