Anyone running stang suspension brand control arms

[go-stang5.0]

Specifically there rear lowers. I was looking at the ones with an adjustable spring perch. There like $100 cheaper than the MM ones. So I'm wondering if anyone has them and can comment or if you have any suggestions....heres the link to them

http://www.stangsuspension.com/store/comersus_viewitem.asp?idproduct=515

 

[go-stang5.0]

bump

 

[1TallMF]

Wow, thats how much I paid for my non-adjustable MM arms. They do appear to have the 3-piece polyurethane bushing on the frame end, which is good. They're just an exact copy of the MM arms. The only thing I have heard of is some companies use inferior quality teflon liners in the spherical bushings that wear-out over time. But at least you can replace them if needed. Seems like a good buy though IMO.

 

[go-stang5.0]

Yea the only difference I can see is that around the spring perch these arms have 2 pieces mitered where as the the MM ones have a continuous tube with a bend in it. Bends are technically stornger but stang suspension has a good return policy and at that price I think I will give them a shot. I just wante'd some first hand experience with there finish, weld quality, etc...Ya know the stuff that really matters.

 

[go-stang5.0]

Ill post pics here and a review when I buy..

 

[1TallMF]

Ah yes, good eye. While the bent tube MM use might be a better design, I think you'd probably take out your torque boxes before doing any damage to the arms. They're the same design as the Pro3 ones:
http://www.partshopper.com/shop/Pro3-Mustang-Jacker-Lower-Control-Arms-79-04-m178.html

Alot of guys use these and I haven't heard any real complaints about them. They should work fine.

 

[94GTLaserRC]

I bought CC plates from them last year... they were MM brand, but Josh over there was really helpful. Let us know if you get them...I could use them for myself.!
RC

 

[go-stang5.0]

I'll let you guyz know how it goes however it prolly will be april by the time I purchase them so hang in there.