I'm using a cobra intake takeoff from a '95 cobra. Wondering if the heads will clear the intake?
Rear end has Ford racing 3.73. It does have sub frames welded on. I do need to upgrade clutch and trans and fuel pump. I plan on buying from an engine builder who works solely on 302s What TB size should I use and a what's good reliable Mass Air?
I’ve seen Tom and Matt moss get them to flow a decent amountWhether the ported Cobra intake will be fine or not depends on what your goals are. With good heads and cam, the intake can be very restrictive. For example, a nice setup will push 400 rwhp or more with a 347. With the Cobra it would be a struggle to get there.
I put a healthy 347 in my 95, and also into a 96 and didn’t have any issues. It’s the exact same size engine that was there before, just with more cubes.What should I look out for as far as:
1) hood clearance (I like to keep the stock hood)
2) how to reprogram the computer
3) pitfalls
any other thoughts on your experience.
thanks
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?