AOD help needed quickly

cmb91LX

New Member

Apr 20, 2004

432

0

0

Memphis

May 2, 2005

#1

• May 2, 2005

• #1

OK, here is the scoop. 91LX, @3100LBS, 306, forged pistons, AFR 165s, EDEL Performer intake, 65 TB, 73MAF, 24LB inj, NO AC, NOsmog, NO PS, 373 gears, alum driveshaft, 17 inch wheels and a 100shot

Behind all this is a freshly rebuilt to factory specs AOD with factory converter. It is shifted by a B&M hammer shifter.

Here are my questions:

1) In the past, I have ran AODs and the problem I had was holding 2nd gear. I always did the old 1-D-1 shuffle to hold 2nd. Now with this B&M shifter, I dont believe I will be able to do that, since you slap it and it upshifts. My question is what is my best way to hold 2nd to the end of my powerband?
Would a shift kit remedy this and if so, which one/brand.

2) Which stall speed would best suit my needs? It is not a drag car but also not just a daily driver. I dont car too much for the makers of them , just wanting stall speeds recommendations. Others on this site have said anywhere from 2200-3500, which is quite a range.

I am just putting everything together and about to order the converter and whatever else I need this week so any quick help would be grealy appreciated.

Also, what kind of HP numbers should this combo be putting out at the wheels, @270?

Thanks in advance
Chris

 

mricci

Member

Aug 17, 2003

301

0

17

Massachusetts

May 2, 2005

#2

• May 2, 2005

• #2

i would send and email to edge converters. http://www.edgeracingconverters.com. They will help you pick just the right converter for your car.

 

cmb91LX

New Member

Apr 20, 2004

432

0

0

Memphis

May 2, 2005

#3

• May 2, 2005

• #3

OK, I can do that. What about the shifting options?

 

cmb91LX

New Member

Apr 20, 2004

432

0

0

Memphis

May 2, 2005

#4

• May 2, 2005

• #4

Just sent them an email requesting information. Thanks for the link, they seem like they are above par from most converter builders.

 

rsw007

New Member

Jul 7, 2004

469

1

0

Lexington,SC

May 2, 2005

#5

• May 2, 2005

• #5

well the money you spent on the motor. you need to do the same to the tranny. get an lentech or pa valvebody that will change od to a toggle switch.
and a edge or pi converter.

 

cmb91LX

New Member

Apr 20, 2004

432

0

0

Memphis

May 2, 2005

#6

• May 2, 2005

• #6

See , that is the thing. I paid 1200 for the entire setup top to bottom from my best friend. He is putting in a 393 in his 91 and he offered me the setup for next to nothing. I will more than likely go with the Edge converter. I just want to ensure the trans doesnt shift out @4500 from the 2-3 shift. If a shift kit will accomplish this, that will be my solution. I just need to know that 2nd will hold for the entire powerband.

 

rsw007

New Member

Jul 7, 2004

469

1

0

Lexington,SC

May 2, 2005

#7

• May 2, 2005

• #7

ive heard good stuff about the baumann kits

 

cmb91LX

New Member

Apr 20, 2004

432

0

0

Memphis

May 2, 2005

#8

• May 2, 2005

• #8

I will check into them. Thanks for the input.


Anyone else?

 

cmb91LX

New Member

Apr 20, 2004

432

0

0

Memphis

May 2, 2005

#9

• May 2, 2005

• #9

Someone else has had to have solved the 2-3 early shift problem before. How did you do it?

 

S

SAY GO

Member

Apr 19, 2005

148

0

16

May 2, 2005

#10

• May 2, 2005

• #10

you can do the 1-d-1 shift with that shifter, i have it and ive done it

 

88stangmangt

Active Member

Nov 25, 2003

2,332

1

48

Stafford,VA

May 2, 2005

#11

• May 2, 2005

• #11

cmb91lx- clear your message box stangnet wont let me send anymore to you due to the fact you have to many stored.

 

D

davs5.0

Founding Member

Jul 10, 2002

921

0

0

windsor,ontario,canada

May 3, 2005

#12

• May 3, 2005

• #12

if your serious about getting rid of the 1-d-1 and want to do it right, get yourself a Lentech valvebody. Your shifter will work the way it is designed to work and you never have to worry about a full throttle OD upshift.

 

cmb91LX

New Member

Apr 20, 2004

432

0

0

Memphis

May 3, 2005

#13

• May 3, 2005

• #13

88stangmangt said:

cmb91lx- clear your message box stangnet wont let me send anymore to you due to the fact you have to many stored.

Click to expand...

88stangmangt, sorry about that. I have deleted several messages. Please resend

 

cmb91LX

New Member

Apr 20, 2004

432

0

0

Memphis

May 3, 2005

#14

• May 3, 2005

• #14

OK, the thread is now invalid. I SOLD OUT. The guy I bought the motor setup from just agreed to sell me his 6 month old Tremec for dirt cheap. So now, instead of putting money towards a converter, valve body, or shift kit I will be gettting a Centerforce and Pro50

So, if anyone needs/wants an AOD that has just been rebuilt to factory specs with converter, B&M shifter, trans cooler, and processor for AOD car, IM me and maybe we can work something out.