Fox Aod shifter cable missing hardware

mattys91gt · Nov 18, 2022

So I have a bm hammer shifter in my 91 mustang gt automatic aod with a lmr kickdown.it seems like the hammer shifter is broken so I'm trying to put the stock shifter back in and I'm having no luck at all, I have new plastic bushing what can I use to make this work

evintho · Nov 18, 2022

So what's the problem? Just reinstall your factory shifter and don't forget the TV cable.

General karthief · Nov 18, 2022

A little more specific please.

mattys91gt · Nov 19, 2022

So after taking the cable off the car they drilled out the holes on the shifter bracket and my issue is I'll adjust the cable with both in od then I'll have park but not 1, what's been some of the main issues with the BM hammer shifter? I got to shift it and it moves but the gear selector doesn't move,it's hard to explain and I can't find a diagram for the shifter cable route and this aod selector that goes in the bushing is junk so any hardware I could use would be great and what to do with the black sleeve on the shifter cable,I read ita for installing it I'm trying to sell it so I just need this to work thank you

mattys91gt · Nov 19, 2022

This is the holes they made on the bracket,is there a way to modify the bracket at all

evintho · Nov 19, 2022

Not sure if this'll help but, it's a '93 AOD with factory Mustang shifter/linkage but it's not in a Mustang.
This is cable routing.......

Looks like your PO's may have elongated the holes on the bracket. Here's the factory bracket mounting.......

Here's the shifter cable/lever in Park position.......

mattys91gt · Nov 19, 2022

Ya the holes are huge and I can't get any slack out of the cable.what can I do to get the bracket to sit correctly,washers or bigger nut since mines bolts on to of another nut if that's even correct

evintho · Nov 19, 2022

You probably need to find another bracket or, weld up the holes in your bracket then drill new ones.

mattys91gt · Nov 20, 2022

evintho said:
You probably need to find another bracket or, weld up the holes in your bracket then drill new ones.

I'm not sure if u can replace that bracket I'd love to find one that runs the cable straight

evintho · Nov 20, 2022

The factory cable wasn't designed to run straight. On Mustangs, it loops around inside the transmission tunnel IIRC. Also, I believe the bracket is integral with the shifter cable.

https://lmr.com/item/LRS-7395AR/84-93-Mustang-Aod-Shifter-Cable

mattys91gt · Nov 20, 2022

evintho said:
The factory cable wasn't designed to run straight. On Mustangs, it loops around inside the transmission tunnel IIRC. Also, I believe the bracket is integral with the shifter cable.

https://lmr.com/item/LRS-7395AR/84-93-Mustang-Aod-Shifter-Cable

That's the cable I have and I thought it did a loop,do u know where the black sleeve stays and a blue circle is in the front of the cable

evintho · Nov 20, 2022

If you're talking about the black rubber sleeve, it stays where it is. It's just added protection/reinforcement for where the cable loops. I don't know what blue circle you're talking about.

mattys91gt · Nov 21, 2022

Now mine had a clamp that held the cable to the floorboard I can't find any install videos for the stock cable and the blue thing moves with the black sleeve ,I'm just not sure if it's the huge holes in the bracket or the hammer shifter is broken I'll have to watch more videos and read up on putting the stock aod shifter back in thank you for the reply I just wanna sell the car

slow84lx · Mar 8, 2024

I installed the B&M Hammer shifter in the late '90's when the factory shifter broke. I don't recall drilling any new holes during installation, although it has been a minute since that time.

It's always worked just fine, well,....when the car was running that is.

Fox Aod shifter cable missing hardware

mattys91gt

Active Member

evintho

General karthief

wonder how much it would cost to ship you a pair

mattys91gt

Active Member

Attachments

mattys91gt

Active Member

Attachments

evintho

mattys91gt

Active Member

evintho

mattys91gt

Active Member

evintho

mattys91gt

Active Member

evintho

mattys91gt

Active Member

slow84lx

clean it good before insertion

Similar threads

Fox Aod shifter cable missing hardware

Active Member

wonder how much it would cost to ship you a pair

Active Member

Attachments

Active Member

Attachments

Active Member

Active Member

Active Member

Active Member

clean it good before insertion

Similar threads

Privacy & Transparency

Privacy & Transparency