Aod To T5 Swap Having Trouble Help

89gt40lx · Jul 9, 2005

I HAVE THE AOD OUT AND I JUST WANTED TO CHECK THE STARTER TO SEE IF IT WORKS I REALIZED THAT THE STARTER HARNESS WAS DIFFERNT FROM THE 5 SPEED SO I HOOKED UP THE HARNESS FOR THE 5SPD BUT IT WONT CLICK STILL..WHATS HAPPENING?? I HAD THE PEDAL ASSEMBLY HOOKED UP ALREADY (5SPD) AND EVEN WITH THE AOD IN IT STILL I HAD TO PUT THE CLUTCH IN TO START CAR...BUT NOW THAT I HAVE THE AOD OUT NOTHING

vikingpower · Jul 9, 2005

do you have the switch thingy for the clutch that closes the starter circuit when you depress the pedal? also you probly need a manual trans specific computer

89gt40lx · Jul 9, 2005

My Tranny

I Have All The Switches Hooked Up To The Clutch Pedal...and From What Everyone Told Me I Dont Need A 5spd Computer?? Im So Confused...

89MustangGX · Jul 10, 2005

There is a neutral safety switch on the tranny "circuit" on the tranny end of the wiring harness as well, I believe. I don't think it will start without a tranny to close the circuit.

Mustang5L5 · Jul 10, 2005

Yeah, there is a 4 wire harness from the car to the tranny. Two wires go to the reverse lights and the other two get jumped together.

Distortion 5.0 · Jul 10, 2005

You can run that switch to the inside of the car and hide if as an anti theft device if you like. I believe it will also turn on the reverse lights but best to wire that part in. In my car it worked with the auto computer, just threw every autotrans code it could think of.

Mopar1 · Jul 10, 2005

vikingpower said:
do you have the switch thingy for the clutch that closes the starter circuit when you depress the pedal? also you probly need a manual trans specific computer

The computer he has is fine, you dont need a comp for a manual car.

The Shape · Jul 10, 2005

Distortion 5.0 said:
You can run that switch to the inside of the car and hide if as an anti theft device if you like. I believe it will also turn on the reverse lights but best to wire that part in. In my car it worked with the auto computer, just threw every autotrans code it could think of.

What year model car do you have? I don't know of any AOD codes.

89gt40lx · Jul 10, 2005

what if i push start the car will it start then....i had the tranny harness of a wrecked 92 gt that i had but the secretary here at my body shop threw it away??? does anyone know where i can get one??? everything went good (except the damn thing wont start)
thanks

04sleeper · Jul 10, 2005

The starter should be the same for the auto as it is the 5 speed.
When I did my conversion, i just reused my stock starter and hooked it back up the same as the auto. Worked just fine.

Mustang5L5 · Jul 10, 2005

I Agree, AOD and t-5 harness are the same. If your starter is different, then you have a new nigh torque starter from a 92-93. It will work but it requires you to totally rewire it to make it function. It's set up differently.

That may be why you can't start the car. Put the original starter back in and try that. It will work with the 5-spd.

Hang onto the hi-torque starter. You can look up what you need to rewire to make it work later on and do the conversion.

04sleeper · Jul 10, 2005

Mustang5L5 said:
I Agree, AOD and t-5 harness are the same. If your starter is different, then you have a new nigh torque starter from a 92-93. It will work but it requires you to totally rewire it to make it function. It's set up differently.

That may be why you can't start the car. Put the original starter back in and try that. It will work with the 5-spd.

Hang onto the hi-torque starter. You can look up what you need to rewire to make it work later on and do the conversion.

I'm thinking this is what happened.

Distortion 5.0 · Jul 10, 2005

The Shape said:
What year model car do you have? I don't know of any AOD codes.

87 lx 2.3. It threw codes for the TCC, for the NSS, and I think there was one more but not sure.

zeno22 · Jul 17, 2005

I just did the swap in my car, it is older 86 coupe , but same principles apply and possibly wire colors. Under the car in the tranny tunnel area you have your origianl AOD harness that plugs to the tranny, which won't work with a manual tranny. So what you need to do is find out which wires are for the reverse lights, and which are for the Nuetral safety switch, ony mine they are red/light blue wire and a white and pink, you just jump those so that it thinks it has completed the circuit or run a switch in the car as mentioned above and use that, once the circuit is complete it will put the power to your starter solenoid and then to your starter when in the start position.

The Shape · Jul 17, 2005

Distortion 5.0 said:
87 lx 2.3. It threw codes for the TCC, for the NSS, and I think there was one more but not sure.

Oh ok you swapped out an A4LD for a t-5 I thought you meant an AOD from a 5.0 car which has no electronics.

mustangjoe87 · Jul 17, 2005

89gt40lx said:
what if i push start the car will it start then....i had the tranny harness of a wrecked 92 gt that i had but the secretary here at my body shop threw it away??? does anyone know where i can get one??? everything went good (except the damn thing wont start)
thanks

i bought that harness off of ebay and didnt even use it when i did mine. but im not using the clutch interlock switch.

Aod To T5 Swap Having Trouble Help

89gt40lx

New Member

vikingpower

New Member

89gt40lx

New Member

89MustangGX

I have nothing productive to add!

Mustang5L5

That is…until I whipped out my Bissell

Distortion 5.0

New Member

Mopar1

Member

The Shape

89gt40lx

New Member

04sleeper

Mustang5L5

That is…until I whipped out my Bissell

04sleeper

Distortion 5.0

New Member

zeno22

New Member

The Shape

mustangjoe87

Member

Similar threads

Aod To T5 Swap Having Trouble Help

New Member

New Member

New Member

I have nothing productive to add!

That is…until I whipped out my Bissell

New Member

Member

New Member

That is…until I whipped out my Bissell

New Member

New Member

Member

Similar threads

Privacy & Transparency

Privacy & Transparency