AOD TO T5 SWAP.....

[Georgie]

Bolts:
- Upper bell housing bolts (7/16" coarse thread 1.5" long, or 1/2" thick spacer/washers)
- Pressure plate bolts
- Starter plate to bell housing bolt
- Transmission to bell housing bolts

THESE R THE BOLTS THAT I NEED TO COMPLETE MY SWAP... I GOT THIS LIST FROM http://www.wcfords.com/articles/tech/t5swap/t5swap.html

ANYONE KNOW EHRE THE HELL I CAN GET HESE.. I ALREADY GOT THE PRESSURE PLATE BOLTS AND DOWLS FROM FORD RACING..

PLEASE HELP :SNSign:

 

[chobracobra]

Reuse all the bolts. Put some washers on the top bellhousing bolts to make them snug. As for the tranny to bell bolts, I got mine from lowes. Grade 8- 7/16 14 TPI

 

[83Mustang427TT]

www.50resto.com has the bolts

 

[Georgie]

NO THEY DONT..THEY ONLY HAVE THE PRESSURE PLATE BOLTS

 

[Georgie]

can i cut the upper bolts???

how long they supposed to be ???

 

[Georgie]

bump

 

[Hickfied]

If you cut them, make sure you put a nut on them before you cut... Makes it alot easier using them to have a good thread on then end when you take the nut off

And I believe they should be 1.5" long