AOD TV cable issues

ok so ive had an ongoing battle with the tv cable on my aod. some days its shift right, some days it shifts sloppy. sometimes it kicks down and sometimes not. so, in an attempt to get this thing solved. i used this webpage AOD ADJUST well when i did this, i got my throttle pedal back, and it became soft again. BUT the trans wouldnt shift into OD. i followed the rules to it, and i have the block style btw. so it shifted like crap, wouldnt go into OD and had absolutely no kickdown. ok, i also noticed that on the cable, the inner most part the actual steel cable, well theres like 1/4" of it sticking out at the very end of the rod. this is with teh block ALL THE WAY to the back of the rail. ive been using zip ties for the last few days to take up the slack so i wouldnt burn up OD.

when i had my stock tb it used to not be like that at all, there was never any slack in the line. is it possible that the bracket is loose down on the trans and is allowing the cable to get alot of slack. im just throwing out ideas here guys. this is driving me insane becasue every few weeks there has been a little more slack in it. what could be the problem???? thanks for any help

Bart

yeah definately, the pedal is super stiff. my gf absolutely hates to drive it because she says it hurts her leg. it doesnt hurt mine, it just gets old real quick.

i was askin about this to some other guys earlier and one mentioned putting it in d when i adjusted it.......am i supposed to do that...i mean i cant see it making a difference. but...just asking.

well ive followed the rule of keeping it high, if just "guessing". i understand the way it works, im just wondering why it will change, im thinking maybe the block is actually moving down the rail...as in the teeth on it are worn.

i can check the psi, but i dont know where the port is for on it. i know its on the pass side, but where. i have limited sight under there, just a proximity would be ok, i should be able to find it.