• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

AODE tranny fluid

  • Thread starter Thread starter HISSIN50
  • Start date Start date May 21, 2005

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
May 21, 2005
#1
  • May 21, 2005
  • #1
Hello,

Real quick one.

I have read that one can/should run Mercon V in an AODE (from Jerry's articles, etc). But do you guys do it, or stick with Mercon? And if you do run Mercon V, can you add it to Mercon or should one do a complete fluid transfer and run straight Mercon V (are they compatible)? Any other pertinent info is welcome.

Thank you.
 

bjl95mustang

Founding Member
Jan 18, 2000
1,495
0
36
Austin,TX
May 22, 2005
#2
  • May 22, 2005
  • #2
Mercon V is a syn blend of tranny fluid. It's pretty much like running syn blend engine oil. I have never head not to mix them.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
May 22, 2005
#3
  • May 22, 2005
  • #3
Thank you for the reply sir.

the Mercon V can help with the puter calibration to help with shudder control and shift quality (why it was a TSB on *some* Ford trannies). But I am hoping someone knows definitively whether Mercon III and Mercon V can be mixed. Sometimes the fluid can become unstable if mixed.
 
W

wytstang

Mustang Master
Mar 14, 2004
4,988
4
78
Summerville,SC missing South Fl. weather :(
May 22, 2005
#4
  • May 22, 2005
  • #4
I don't think so I remember when I worked at ford a while ago we had to drain it completly then use MV for the shutter issue. I personally don't like mixing fluids besides tranny and PS (only in the PS pump that is).
 

bjl95mustang

Founding Member
Jan 18, 2000
1,495
0
36
Austin,TX
May 23, 2005
#5
  • May 23, 2005
  • #5
Just make sure you get as much out of it as you can. If you have a stock converter then take the drain plug out of it.

The best way to drain the the tranny is to take the cooler feed line off witch will be the lower line and hook up a piece of hose to it. Start your car and just let it idle and it will pump the fluid out. Once the fluid stops flowing turn your car off. Add 3-5qt of merc v fluid then start the car again and let it idle till the fluid stops flowing. Then drop the pan and change the filter and add fluid. I have done this and a few ford techs who do aode/4r70w's do this too. You wont hurt anything as long as you dont rev the engine with out fluid in the tranny and you turn the enging off when the fluid stops flowing.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
May 23, 2005
#6
  • May 23, 2005
  • #6
Wytstang (Danny?)and BJL, thanks for the replies. I only needed to top it off at this point (added auxillary cooler) and did not know if the two fluids were compatible. I errored on the side of safety, which was confirmed by you two, and used Mercon.

In reading some of the info out there on the AODE's, it was a little ambiguous as to whether one could mix them or not (the underlying point made was that MV could be used, but no mention if mixing was permissable).

When i do a filter or have the pan off, I might try a full flush/fluid exchange. Thanks for the info guys.
 
You must log in or register to reply here.

Similar threads

Drivetrain What's the proper way to check auto trans fluid?
  • evintho
  • Jan 13, 2024
  • Fox 5.0 Mustang Tech
Replies
3
Views
2K
Fox 5.0 Mustang Tech Jan 15, 2024
JD1964
A
Blow through intercooled questions
  • AngryH58
  • Aug 31, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
5
Views
268
1996 - 2004 SN95 Mustang -General/Talk- Sep 1, 2026
AngryH58
A
A Fox Quest! Find Vanilla Ice's 5oh
  • Noobz347
  • Jul 22, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
20
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 18, 2025
FastDriver
Engine Suggestions on an engine rebuild. Stock cam/GT40Ps or aftermarket on both for a fun weekend driver?
  • MadSquirrelTech
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
1K
Fox 5.0 Mustang Tech May 7, 2026
MadSquirrelTech
Considering widening my rear wheels, would like to verify my thoughts on fitment
  • 2000xp8
  • Jul 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
37
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 18, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?