M mercurycapri Member May 30, 2006 211 2 18 washington May 4, 2015 #1 May 4, 2015 #1 Would like to use a aode transmission on a carburetor 347 engine. is this possible? How could I do this? Thank you for any help. If it helps its a 1982 mustang originally manual transmission.
Would like to use a aode transmission on a carburetor 347 engine. is this possible? How could I do this? Thank you for any help. If it helps its a 1982 mustang originally manual transmission.
rbohm Founding Member Apr 12, 2002 6,698 550 204 tucson,az May 4, 2015 #2 May 4, 2015 #2 its the same as doing any auto trans swap, except that you also need a stand alone transmission controller. a few parts you will need; the correct 164 tooth flexplate torque converter trans cross member trans controller output yoke for the AODE you may need to shorten up the drive shaft. there are a few other things i cant remember right now, someone will pop in and add their information.
its the same as doing any auto trans swap, except that you also need a stand alone transmission controller. a few parts you will need; the correct 164 tooth flexplate torque converter trans cross member trans controller output yoke for the AODE you may need to shorten up the drive shaft. there are a few other things i cant remember right now, someone will pop in and add their information.