• Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-

Are 64 1/2 Stangs still sought after?

  • Thread starter Thread starter Stang2Man
  • Start date Start date Jan 29, 2010

Stang2Man

Founding Member
May 16, 2000
363
0
17
In the Hood of Newbern Beyotch
Jan 29, 2010
#1
  • Jan 29, 2010
  • #1
My wife and I have a 64.5 (65) Pagoda Green coupe. Had a restoration awhile back. We're considering selling it, but are people still after these cars like they were back in the 80's/90's?
 

tx65coupe

Active Member
Nov 29, 1999
1,551
1
37
Jan 30, 2010
#2
  • Jan 30, 2010
  • #2
I would think so. I don't see why not.
 

Stang2Man

Founding Member
May 16, 2000
363
0
17
In the Hood of Newbern Beyotch
Jan 30, 2010
#3
  • Jan 30, 2010
  • #3
I know Barret Jackson isn't always the most accurate price guide for the market, but a Pace Car sold pretty low in my opinion this year. Of course people that live in this area have no idea what a 64.5 really is, I even had a guy argue with me that he bought the first 65 in the county and they never had 260's in em. Oh well.
 

rbohm

Founding Member
Apr 12, 2002
6,698
550
204
tucson,az
Jan 30, 2010
#4
  • Jan 30, 2010
  • #4
people are still looking for the early stangs, but as you noted the prices have come down quite a bit since their peak in the early 90's. and for good reason. the reality is that the market for early stangs then was overheated and prices did not reflect the true value of the cars.
 

tx65coupe

Active Member
Nov 29, 1999
1,551
1
37
Jan 31, 2010
#5
  • Jan 31, 2010
  • #5
I agree. I saw that 64.5 pace car and thought it should have sold for a little more.
 
G

Grand Poobah

New Member
Dec 27, 2009
18
0
0
Feb 1, 2010
#6
  • Feb 1, 2010
  • #6
I'd hold on to it. Unless you BADLY need the money, I'd wait this recession out.


of course, with the current *ahem* administration in office, you'll be waiting for this recession to end for quite some time, unfortunately.

Good luck!
 
6

65ebd65

New Member
Dec 26, 2009
16
0
0
Feb 5, 2010
#7
  • Feb 5, 2010
  • #7
Just out of curiosity, why would anyone seek out a 64.5? or pay a premium price for one?
Not putting them down, I just bought one and for the condition its in, I got it dirt cheap.
 

tx65coupe

Active Member
Nov 29, 1999
1,551
1
37
Feb 5, 2010
#8
  • Feb 5, 2010
  • #8
A 64.5 is much more rare than a 65 or 66.
 
G

GDTrumbo

Member
Jan 22, 2009
199
0
17
Nashville, TN
Feb 5, 2010
#9
  • Feb 5, 2010
  • #9
Stang2Man said:
I know Barret Jackson isn't always the most accurate price guide for the market, but a Pace Car sold pretty low in my opinion this year. Of course people that live in this area have no idea what a 64.5 really is, I even had a guy argue with me that he bought the first 65 in the county and they never had 260's in em. Oh well.
Click to expand...


He probably thinks the 64.5's never had generators or entry level 13" wheels either.

Takes all kinds. GT
 

Stang2Man

Founding Member
May 16, 2000
363
0
17
In the Hood of Newbern Beyotch
Feb 5, 2010
#10
  • Feb 5, 2010
  • #10
Actually, he did try to make that argument, and that they all had pony interior.
 
6

65ebd65

New Member
Dec 26, 2009
16
0
0
Feb 5, 2010
#11
  • Feb 5, 2010
  • #11
Finally figured out why I got mine so cheap, Its an Arizona car so no rust and in excellent shape.
The oil pump shaft was gone . So I figured it was dropped in the oil pan. I pulled the oil pan out and was marveling at what was a fresh rebuild, the bottom end was absolutely spotless. I dumped the used oil and found 4 pieces of metal in the pan. I determined they came from a gear so after looking over the distributor gear and finding out that the distributor was brand new. I took a flashlight and turning the motor by hand looked down the distributor hole and found the cam was missing gear teeth, chewed up big time. The PO either hammered in a distributor , used the wrong gear on another distributor or forgot to prime the oil pump.
So it's plan B the 260 and 3 speed goes out and a 289 and a 4 speed go in.
Will probably rebuild the 260, just in case I have to sell the car and re-install it with the 3 speed.
Man what a shame, someone stuck a lot of money in the engine and took a lot of trouble to keep the car original. Must have been disappointing.
 
6

65ebd65

New Member
Dec 26, 2009
16
0
0
Feb 5, 2010
#12
  • Feb 5, 2010
  • #12
I pulled the intake, water pump and a valve cover. scratch rebuilding the 260 something went off like a hand grenade in it, the block is shot!
The assembly turns freely, but the damage to the block is bad. Who ever put this motor together had mad skills at laying silicone down. I have never seen it apply so perfectly.
Funny thing , I do not think he had any idea, on what a torque wrench is used for. Every bolt on the intake manifold ,water pump and head was a little more then finger tight but everything was sealed expertly.
Judging by how clean everything is internally, it blew up on their first attempt to start it.
What I really want to say it looks like it was put together by a girl, but I know better then that. Must have been a girly man. Still no regrets in buying this car, any cheaper and I would have been arrested.
I can feel the pain of the previous owner, to have been so close.
It must have been heartbreaking.
 
6

64WorldsFaircar

New Member
Feb 5, 2010
1
0
0
Feb 5, 2010
#13
  • Feb 5, 2010
  • #13
I believe the cars still apraise high by the insurance companies but don't fetch much money these days because many don't have the original engines and equipment. I feel 64 Convertibles are still fetching good money. I gathered 2 extra 260 engines (just in case) when doing my restoration. Date codes are important for these early cars. I would suggest to you to keep anything you can salvage from the engine. Many of the parts are date coded and different (timing chain cover, intake, linkage, Carb, exhaust manifolds....) The distributor is unique and date coded too. I recently saw a pace car on ebay and thought it went cheap too. I think it is a sign of the times. The risk often can lead to discovery mishaps like you have encountered! I have extra unique 64 parts if you are going original restoration. If you are on Face book, see 64 Mustang Restoration Group.
 
You must log in or register to reply here.

Similar threads

Progress Thread Progress Thread- From6to8's 95 GT/Saleen Supercharged 331 install
  • from6to8
  • Mar 22, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
24
Views
897
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 6, 2026
from6to8
R
Rcapri - 1980 Capri, bought new by inlaws
  • RCapri
  • Sep 18, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
19
Views
872
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 20, 2025
manicmechanic007
Z
Progress Thread zeth194 - New Guy on the Block
  • zeth194
  • Mar 19, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
546
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 26, 2026
LILCBRA
O
SOLD FS: 18" FR500 chrome wheels and Toyo tires
  • optionizerSS
  • May 21, 2026
  • Other Classifieds
Replies
1
Views
104
Other Classifieds Jun 2, 2026
optionizerSS
O
S
Engine 1990 5.0 bogs and pops over half throttle
  • Sander
  • Aug 1, 2025
  • Fox 5.0 Mustang Tech
Replies
4
Views
354
Fox 5.0 Mustang Tech Aug 2, 2025
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?