Are these Ford gears?

LaserSVT · Sep 3, 2009

I ordered a set of gears of ebay that were supposed to only have 500 miles on them and I can easily see thats They were supposed to have come from an Explorer but I doth think these were Ford numbers. I know the 11X41 means 3.73 but I thought the 3557 was a GM gear.
Also there is a chip in one of the pinions teeth. Its not at a contact point but a chip worries me anyway.

Hopefully you guys can tell from the pics if its a Ford gear and if its OK to use with the chip where its at.

Thanks all.

NIKwoaC · Sep 3, 2009

You get what you pay for... Unless you're shopping on ebay.

I don't know that I'd put that junk in my car if I were you.

LaserSVT · Sep 3, 2009

I hear ya. The guy had perfect feedback so I thought it would be all good. Looking at these gears though.... IDK. I am not paying his $27 shipping fee to return them so I will eaither eat it and blast his feedback score or if that chip is no big deal then I will use them. The faces are beautiful with no scarring or nicks. No indentation from deep wear at all.
This is all new to me so any help is appreciated.

NIKwoaC · Sep 3, 2009

All I can say is that when I pulled the 2.73s out of my car when I was rebuilding the rear with a NEW set of 3.73s, there were a few chips and chunks missing from the old gears. I believe it was the resultant of a couple exploded clutch discs that got chewed on by the gears, which I found the wadded up pieces of metal in the fluid when I drained it. Anyway, as bad as that rear end was, it NEVER wined or made grinding noises or anything.

So I guess what I'm saying is, it may work, it may not.

Beasty306GT · Sep 3, 2009

i wouldnt use those..

time only · Sep 3, 2009

Email the buyer and returned them at his expense or blast him on his rating if he won't.

LaserSVT · Sep 3, 2009

Crap. Damn ebay. Here I was thinking I was getting a killer deal for gears.
This is the picture in the ad and they are not the same gears.
View attachment 246841

LaserSVT · Sep 3, 2009

The seller just contacted me and said I can send them back and he will refund me or replace them. He said he will contact FedEx and pay for the return shipping too. Nice service.
I told him that if he has a good pinion gear then he can just send that to me to save him some shipping costs and that I can eaither send him back the old pinion (at his cost) or toss it out. I would imagine that he would just throw it away once he saw it anyway if he is true to his word that he only sells perfect gears. I know the ring gear is fine and it is 8.8" and fits my new Trac Lok like a glove. I dont think any GM gear would fit the Track Lok perfectly but could be wrong.

kck6894 · Sep 3, 2009

Don't use a miss-matched set of gears . He needs to replace the entire set or refund you your money.

LaserSVT · Sep 3, 2009

Ah, didnt know that. Thanks and I will tell him now. Thanks!

LaserSVT · Sep 3, 2009

Right as I was sending him the message he emailed me saying that the gears need to be a pair.
So he is gonna send me a new set and pay to have these returned. He believes its FedEx fault and gonna have them pat.

kck6894 · Sep 3, 2009

LaserSVT said:
Right as I was sending him the message he emailed me saying that the gears need to be a pair.
So he is gonna send me a new set and pay to have these returned. He believes its FedEx fault and gonna have them pat.

was the broken piece in the box?

LaserSVT · Sep 3, 2009

I couldnt find it. WhenI sent him the picture he said "Even Ray Charles would have seen that chip! I wouldnt have sent a set like that out. I am sorry and will take care of it."

NIKwoaC · Sep 4, 2009

I read this:

LaserSVT said:
I told him that if he has a good pinion gear then he can just send that to me to save him some shipping costs and that I can eaither send him back the old pinion (at his cost) or toss it out.

And then got all excited because I knew I had to say this:

kck6894 said:
Don't use a miss-matched set of gears .

But I see kck6894 is on top of it. Gears are a finicky beast, they wear into each other, that's why the break in is so important. They are also manufactured in specific pairs.

kck6894 · Sep 4, 2009

LaserSVT said:
I couldnt find it. WhenI sent him the picture he said "Even Ray Charles would have seen that chip! I wouldnt have sent a set like that out. I am sorry and will take care of it."

well as long as he makes it right like he says he will than all is good!

LaserSVT · Sep 10, 2009

Well he made it right and sent me a pristine set of gears. The customer service was great the whole time too. He said he would give any of my friends the same price on 4.10s or 3.55s too.

So I am gonna put them on pretty soon. Someone on here asked me for mine and I said yes but I forgot who it was. I deleted all mu PMs by accident. No I am not gonna sell them to anyone, the person that PMd me and asked is getting them if he will just PM me again. Red Fox in the avatar and I think 90 was in his screen name.

Anywho, here are the new gears.

View attachment 246121

stanb79 · Sep 10, 2009

sory i do not have answer i just signed up and cant figure out how to post a question can you tell me how

LaserSVT · Sep 11, 2009

stanb79 said:
sory i do not have answer i just signed up and cant figure out how to post a question can you tell me how

View attachment 246120

1991notchbackLX · Sep 11, 2009

I do believe that was me who PM'd you about those old 3.27 gears Laser.

LaserSVT · Sep 11, 2009

Thanks mang, I could not remember for the life of me!
I knew it was a red coupe and thats it.

Are these Ford gears?

Got FB banned again for saying nards

中國製造

Got FB banned again for saying nards

中國製造

Active Member

New Member

Got FB banned again for saying nards

Got FB banned again for saying nards

Advanced Member

Got FB banned again for saying nards

Got FB banned again for saying nards

Advanced Member

Got FB banned again for saying nards

中國製造

Advanced Member

Got FB banned again for saying nards

New Member

Got FB banned again for saying nards

Active Member

Got FB banned again for saying nards

Similar threads

Privacy & Transparency

Privacy & Transparency