Are these good heads for my set-up?

[Fett]

http://www.jegs.com/webapp/wcs/stor...eId=10001&categoryId=20473&searchItemId=66583

I currently have 1.7 "bolt down" rockers, an e-cam, and a Performer intake with 24lb injectors. My current heads are slightly ported/gasket matched E7s. I would be just swapping heads and replacing the lifters and pushrods.

Also, would 19lb injectors work fine, if I were to go back to 19s from 24s...or should I stick with the 24s?

 

[Dark Knight]

You'll need new rocker arms too... you have pedesatl mont, those need stud mount...

 

[Topdowncruise]

Those heads have big valves and ports which should make it good at the track but not so much fun for normal daily driving.

 

[mattmcdan]

The valves will hit your pistons.

 

[low5.0]

for like 200 more you could get some twisted wedges or edelbrocks. Just an idea

 

[brin0357]

windsor seniors are better