• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Ashtray lid help

  • Thread starter Thread starter neilc88
  • Start date Start date Apr 11, 2006
N

neilc88

Member
Apr 11, 2006
8
1
13
Apr 11, 2006
#1
  • Apr 11, 2006
  • #1
Hello All, newbe here,

My ashtray lid separated. The metal base connected to the underside of the ash tray lid came apart. I removed the ashtray lid by sliding it out of the center council by the seal belt clip. I then glued the lid and metal backing together. Now, how do it get the ashtray lid and the ash tray spring back in place? Maybe I have to raise the center council?
 

Strype

Cuthbert catcher
Founding Member
May 11, 1999
61
34
104
Huntsvegas, AL
Apr 11, 2006
#2
  • Apr 11, 2006
  • #2
I've never fixed mine but there is a kit for that- I'd take the whole thing out it doesnt take long

PS: Welcome!
 
D

DeVus1

Founding Member
Mar 29, 2002
400
2
28
P-Town, Va.
Apr 11, 2006
#3
  • Apr 11, 2006
  • #3
The center console is only connected by a couple of screws. They sell ash tray door kits at places like www.50resto.com and the like.
 
N

neilc88

Member
Apr 11, 2006
8
1
13
Apr 11, 2006
#4
  • Apr 11, 2006
  • #4
Thanks for the replys. I don't need any new parts. Just a few more tips on removing the center console.
 

srothfuss

Last night I stabbed the same guy 7 times in a row
Oct 17, 2004
1,796
3
0
Woodward Ave.
Apr 11, 2006
#5
  • Apr 11, 2006
  • #5
There are 4 bolts at the rear of the console.
2 under the shifter bezel and I think 1 or 2 more behind the knee blocker and glove box.

A couple of sockets / screw drivers and a bit of swearing and it comes right out...
 

TRWXXA

Member
Jan 18, 2003
190
1
19
RIGHT BEHIND YOU!!!... Made you look.
Apr 12, 2006
#6
  • Apr 12, 2006
  • #6
Remove the armrest assembly by popping off the oval covers on each side of the armrest base (behind the seatback, and down by the floor), and removing the 4 bolts (2 each side) underneath. Then lift the armrest assembly out.

Then pop out the shifter bezel.

There are two screws under the rear edge of the shifter bezel, and two under the front edge of the armrest assembly. Remove those.

The middle portion of the console containing the ashtray can now be lifted out, by guiding it over the handbrake lever, and unplugging the connectors for the cigarette lighter and the power mirror switch (if installed).
 
N

neilc88

Member
Apr 11, 2006
8
1
13
Apr 27, 2006
#7
  • Apr 27, 2006
  • #7
Thanks all for the help. Everything went back together good.:SNSign:
 
You must log in or register to reply here.

Similar threads

83 Dash lites no workee....
  • limp
  • May 30, 2023
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
22
Views
4K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 5, 2023
AeroCoupe
M
Progress Thread mnky99 2001 V6 evap core, ac compressor, heater core replacement
  • mnky99
  • Sep 5, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
750
1996 - 2004 SN95 Mustang -General/Talk- Sep 5, 2025
mnky99
M
J
Progress Thread Family member 1989 GT- Backstory and updates
  • JRC99
  • Apr 19, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 26, 2025
JRC99
J
E
Finished my Fox Hydroboost Install - Tips
  • Engineer Duane
  • Apr 9, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 5, 2025
Engineer Duane
E
1969, 1970 mustang heater box repair/replace instructions (no AC)
  • 70mstang
  • Apr 9, 2023
  • Classic Mustang Specific Tech
Replies
0
Views
6K
Classic Mustang Specific Tech Apr 9, 2023
70mstang
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?