First Question- I have a set of domed forged pistons with floating pins laying around and want to use them instead of the hyper pistons which are on my stock rods and they are pressed on. How would I go about doing this. I don't know if the forged piston can be pressed or not, would I have to get new rods or what?
Second Question- I have been reading on how to check piston to valve clearance with the clay method and it says not to use hydraulic lifters when checking instead use solid lifters. But the hydraulic roller lifters are longer then the solid lifter, so is there a certaint solid lifter to use? Thanks for any help you can provide.
Second Question- I have been reading on how to check piston to valve clearance with the clay method and it says not to use hydraulic lifters when checking instead use solid lifters. But the hydraulic roller lifters are longer then the solid lifter, so is there a certaint solid lifter to use? Thanks for any help you can provide.
