• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

ATI procharger experiences?

  • Thread starter Thread starter diablostang
  • Start date Start date Jan 26, 2006

diablostang

New Member
Sep 21, 2004
425
0
0
Raleigh, NC
Jan 26, 2006
#1
  • Jan 26, 2006
  • #1
hey guys

I'm looking at a 95 5.0 car with a Intercooled P1SC ATI Procharger @11psi... Apparently the guy said they tend to leak oil a lot, and had to take it off once and send it to ATI to have it fixed..? I was surprised to hear this, since all I've heard about ATI is good stuff... Anyone know anything? Got recommendations/experiences?

THanks
 
B

bimmertech

New Member
May 3, 2005
1,123
0
0
merriam, ks
Jan 26, 2006
#2
  • Jan 26, 2006
  • #2
you mean ATI Leakchargers?
 

SeventyMach1

Keep it lubed .... keep it straight .... and keep
Mar 30, 2005
1,940
3
36
North Carolina
Jan 26, 2006
#3
  • Jan 26, 2006
  • #3
Wat up diablo! How ya' liking that new '94 GT you picked up? Wow ... already looking at another one? You're keeping the stable stocked, lol.

Anyway, I have no personal experience with the ATI stuff .... but I've never really heard anything bad about them.
 

SeventyMach1

Keep it lubed .... keep it straight .... and keep
Mar 30, 2005
1,940
3
36
North Carolina
Jan 26, 2006
#4
  • Jan 26, 2006
  • #4
SeventyMach1 said:
but I've never really heard anything bad about them.
Click to expand...



But apparently Ben has, lol.
 

diablostang

New Member
Sep 21, 2004
425
0
0
Raleigh, NC
Jan 26, 2006
#5
  • Jan 26, 2006
  • #5
SeventyMach1 said:
Wat up diablo! How ya' liking that new '94 GT you picked up? Wow ... already looking at another one? You're keeping the stable stocked, lol.

Anyway, I have no personal experience with the ATI stuff .... but I've never really heard anything bad about them.
Click to expand...


Sup 70, I'm actually lookin for my Dad, haha.
 

SeventyMach1

Keep it lubed .... keep it straight .... and keep
Mar 30, 2005
1,940
3
36
North Carolina
Jan 26, 2006
#6
  • Jan 26, 2006
  • #6
Oh, that's right .... he sold that white Lightning didn't he?
 

diablostang

New Member
Sep 21, 2004
425
0
0
Raleigh, NC
Jan 26, 2006
#7
  • Jan 26, 2006
  • #7
SeventyMach1 said:
Oh, that's right .... he sold that white Lightning didn't he?
Click to expand...


Yup, he has a 94 too, and it's got no engine, so that's what this would be for.
 

diablostang

New Member
Sep 21, 2004
425
0
0
Raleigh, NC
Jan 26, 2006
#8
  • Jan 26, 2006
  • #8
bimmertech said:
you mean ATI Leakchargers?
Click to expand...


Well that sounds bad... RandyHaywood recommended the Procharger over a KenneBelle when we got some quotes/recommendations from him.. Local Mustang speedshop for those who don't know him.

 
B

bimmertech

New Member
May 3, 2005
1,123
0
0
merriam, ks
Jan 26, 2006
#9
  • Jan 26, 2006
  • #9
SeventyMach1 said:
But apparently Ben has, lol.
Click to expand...


ATI is right down the road and an engineer for them admins on a local board. he acknowledges the fact that they did have pretty bad leak issues, but he states the newer models are alot better.

soooo, if it's an older head unit i would try and trade it for a newer one or sell it and buy some other crap.
 

fords2fast4u

Founding Member
Mar 27, 2000
1,426
2
39
Mission Viejo, CA
Jan 29, 2006
#10
  • Jan 29, 2006
  • #10
oil leaks eh? yeah, i would say that i have some experience on this issue... when i took the procharger off of my 95 GTS and went to put it on the 94 cobra, the front seal had busted somehow and when i fired up the engine, it threw oil everywhere... lol - hit the fricking sealing and all over the damned place... but i called ATI and got the part number, went to a local shop and got a replacement and have had no problems since.

the front seal is really the only place that i could see it leaking... and who knows, maybe the head unit got knocked around in the couple of months that it was sitting before i put it on my car.

boost is still awsome...
 

ponyboy19

Founding Member
May 24, 2000
1,640
0
36
Jan 29, 2006
#11
  • Jan 29, 2006
  • #11
I use to run the P1sc @ 14psi without the intercooler. The one thing we noticed is the charge temps were quite a bit higher than an S-trim with out the intercooler to help out. I've heard the P1sc-2 will produce lower temps. I never had an issue with mine leaking and I bought it used and drove it for a few thousand miles before I sold it. I think I just read where they threw a P1sc on a 05 and were down in the high 9's with it.
 
You must log in or register to reply here.

Similar threads

S
Fuel ‘88 GT Runs Rich Cold — Fixes Itself When I Unplug Sensors (ECT, MAF, O2, etc.)
  • Sufarry
  • Nov 6, 2025
  • Fox 5.0 Mustang Tech
Replies
12
Views
970
Fox 5.0 Mustang Tech Nov 9, 2025
Mustang5L5
S
Drivetrain 8.8 Pinion and 302 rear main seal leaks after replacing. 93 5.0 with t-5
  • Steigy4827
  • Jun 23, 2025
  • Fox 5.0 Mustang Tech
Replies
10
Views
756
Fox 5.0 Mustang Tech Apr 1, 2026
Steigy4827
S
P
High idle issue and leaking after running.
  • PHoffman
  • Dec 24, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
510
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Dec 24, 2024
General karthief
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
3K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
M
Progress Thread mnky99 2001 V6 evap core, ac compressor, heater core replacement
  • mnky99
  • Sep 5, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
619
1996 - 2004 SN95 Mustang -General/Talk- Sep 5, 2025
mnky99
M
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?