• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

ATTN: Those who have installed a B&M Hammer

  • Thread starter Thread starter 89MustangGX
  • Start date Start date Dec 14, 2004
Prev
  • 1
  • 2
First Prev 2 of 2

89MustangGX

I have nothing productive to add!
Jul 3, 2001
10,262
1
0
46
Mill Creek, WA
stangnet.cardomain.com
Dec 17, 2004
#21
  • Dec 17, 2004
  • #21
Jay913 said:
I installed the hammer shifter about a year ago and I never encountered the problem you had. It does seem like your console is sitting farther back or something. I’m not quite sure to be honest with you. My install went fairly smooth and took the better part of the afternoon to complete. Glad to see you were able to work around the problem.
Click to expand...

Thanks for the pics. I've basically come to the conclusion that if I still had the padding and insulation under the carpet it would sit up higher and this probably never would have happened. It was close enough that I think it made all the difference.

I'm planning to run a similar knob but with a button I can use for my transbrake, etc.

Thanks again -- I'll be back if I have any more issues.
 

89MustangGX

I have nothing productive to add!
Jul 3, 2001
10,262
1
0
46
Mill Creek, WA
stangnet.cardomain.com
Dec 17, 2004
#22
  • Dec 17, 2004
  • #22
Ok, i decided to trim a little more, and it fits nicely now -- does not touch the console. Still hidden under the cover, so all is well.

Now, moving on -- the shift indicator. I played with it a little, then I popped in the cover that lists the P,N, etc. Now this doesn't really fit as tight as I'd think it would. I don't know that it will rattle around and I don't think it will come loose, but it seems to be able to move a little. Is this common? Is this worth worrying about? I was thinking about putting a dab of rubber cement on it to hold it in place, but didn't know if it was even worth it.
 

89MustangGX

I have nothing productive to add!
Jul 3, 2001
10,262
1
0
46
Mill Creek, WA
stangnet.cardomain.com
Dec 19, 2004
#23
  • Dec 19, 2004
  • #23
TTT
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Dec 19, 2004
#24
  • Dec 19, 2004
  • #24
dont know Adam. how about a piece of double sided tape (the kind that is the thickness of scotch tape, but double sided and clear).
i say this only in case you need to get that piece back out for some reason.

good luck.
 

89MustangGX

I have nothing productive to add!
Jul 3, 2001
10,262
1
0
46
Mill Creek, WA
stangnet.cardomain.com
Dec 19, 2004
#25
  • Dec 19, 2004
  • #25
HISSIN50 said:
dont know Adam. how about a piece of double sided tape (the kind that is the thickness of scotch tape, but double sided and clear).
i say this only in case you need to get that piece back out for some reason.
Click to expand...

Thanks again Buddy. It actually has a couple clips that kind of squeeze the piece onto the sides, but don't hold it from moving side to side very well. It's not going to pop out or anything. That's why I was thinking a little rubber cement (that won't harden or make it impossible to remove) dabbed omnto the clip would just hold it a little better.

I'm really starting to doubt myself and/or these parts when I have multiple issues like this.
 
Prev
  • 1
  • 2
First Prev 2 of 2
You must log in or register to reply here.

Similar threads

3
Hammer shifter problems
  • 387lx
  • Apr 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
170
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 11, 2026
General karthief
T
Fox Help Request: Clutch Cable Installation on T5 Swap — I Can’t Find the Mounting Hole
  • TDM389
  • Feb 19, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
168
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 19, 2026
nickyb
B
Issue with trans mount not lining up with crossmember slots
  • Bbaker2317
  • Mar 16, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
16
Views
839
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 20, 2025
limp
Z
Progress Thread zeth194 - New Guy on the Block
  • zeth194
  • Mar 19, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
573
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 26, 2026
LILCBRA
R
94’ SN95 - Intermittent lope & bogging at moderate rpm
  • Red5.0ho
  • Nov 2, 2025
  • 1994 - 1995 Specific Tech
Replies
5
Views
465
1994 - 1995 Specific Tech Nov 3, 2025
General karthief
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?