• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

back from the dyno & I got a question

  • Thread starter Thread starter just4bob50
  • Start date Start date May 24, 2006

just4bob50

Active Member
Apr 2, 2005
504
5
28
Pa.
May 24, 2006
#1
  • May 24, 2006
  • #1
I had my car retuned after I rebuilt the top end because I put an E-cam in the motor and a smaller pulley on the blower. My car was tuned at a place called Pro-Tune in manhiem Pa. It made 368 rwhp a 5000 rpms and 421 rwtq at 4000 rpms. the AFR was between 12.1:1 and 10.5:1. The total timing was 19 deg. from 3500 on up. There was 10lbs of boost at 5000 rpms and about 12 at 5500 , but no matter what the tuner couldnt get it to make more power past 5000 rpms. Also the AFR was continually rich past 5000 rpms and the changes the tuner was making were having no effect. At 5500 rpms the AFR was 10.0:1. I have a feeling that my Crane HI-6s ign. is the weak link now. The motor is still has the stock heads on so the only changes were the cam and more boost. Does any one have any other ideas as to why power stops building at 5000.
 
8

89white50

Member
Nov 16, 2004
440
1
18
central MA
May 24, 2006
#2
  • May 24, 2006
  • #2
the stock heads....and perhaps the Gt-40's stock lower? and i also dont think the E-cam will make much power after 5500. Did you rebuild the heads with better springs? there could be some valve float if you didn't.
 

just4bob50

Active Member
Apr 2, 2005
504
5
28
Pa.
May 24, 2006
#3
  • May 24, 2006
  • #3
the head were completley rebuilt. both the lower intake and the intake ports of the heads were gasket matched.
 

fidstang

New Member
Jul 19, 2005
307
0
0
South Lansing
May 24, 2006
#4
  • May 24, 2006
  • #4
Do you have a FMU installed? Did he adjust the regulator? I'm just wondering because I'm getting ready to install a powerdyne on mine and wondered how the FMU is going to affect high RPM AFR.
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
May 24, 2006
#5
  • May 24, 2006
  • #5
You say heads were rebuilt but did it get factory springs again or did you match em to the cam?
 

just4bob50

Active Member
Apr 2, 2005
504
5
28
Pa.
May 24, 2006
#6
  • May 24, 2006
  • #6
fidstang said:
Do you have a FMU installed? Did he adjust the regulator? I'm just wondering because I'm getting ready to install a powerdyne on mine and wondered how the FMU is going to affect high RPM AFR.
Click to expand...

I have the ford 90mm MAF and 42lb inj. and adj. reg. / all he had to do was adj the inj. through the lap top. Most tuners hate FMU's
 

just4bob50

Active Member
Apr 2, 2005
504
5
28
Pa.
May 24, 2006
#7
  • May 24, 2006
  • #7
86bluecobra said:
You say heads were rebuilt but did it get factory springs again or did you match em to the cam?
Click to expand...

I beleive they are factory springs that were shimmed for a B-cam. The lift difference between the B & E cam is like .018. Either way I should get better heads when I can afford it.
 
You must log in or register to reply here.

Similar threads

A
Engine 1990 Fox wont rev over 3500 RPMS
  • alex.sweitzer
  • Oct 27, 2020
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
57
Views
15K
Fox 5.0 Mustang Tech Mar 21, 2021
alex.sweitzer
A
T
Forced Induction Vortech Pulley Question (Long Read)
  • tinker451
  • Feb 23, 2020
  • Fox 5.0 Mustang Tech
Replies
0
Views
2K
Fox 5.0 Mustang Tech Feb 23, 2020
tinker451
T
S
Engine 1995 gts 331 stroker head swap questions
  • sn95331gts
  • Jan 6, 2019
  • 1994 - 1995 Specific Tech
Replies
0
Views
1K
1994 - 1995 Specific Tech Jan 6, 2019
sn95331gts
S
Progress Thread Dirty Water Racing 89 Notch Project
  • ShedBuiltMS
  • Sep 29, 2020
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3 4
Replies
64
Views
14K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 28, 2021
Flyboy60
F
P
Info for 05-09 Mustang GT owners who have experienced total power loss (dead stalls) after 1-2 hours of hwy driving
  • purplegold90
  • Oct 31, 2019
  • 2005 - 2014 S-197 Mustang -General/Talk-
Replies
1
Views
4K
2005 - 2014 S-197 Mustang -General/Talk- Nov 1, 2019
racerraj
R
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?