• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

bad idle air control

  • Thread starter Thread starter ja1919
  • Start date Start date May 4, 2005
J

ja1919

Member
Jul 26, 2004
91
0
7
May 4, 2005
#1
  • May 4, 2005
  • #1
i have an 1992 GT auto...i guess i have read when there is a large draw on the electrical system the engine idle will bump up a little..well i had the heat on full..radio on loud..lights on..rear deforst on hazard lights on and honked horn for fun..and my volt meter droped..the engine idle did not respond..the idle was extremely low...i do not know how low due to the tach stuck at 3000 rpms...is this a bad iac??? if so what are the interchanges with other ford cars, if there are any..
 
S

SamSnyder

New Member
Mar 30, 2005
196
0
0
May 5, 2005
#2
  • May 5, 2005
  • #2
Before I'd say "bad" IAC, I'd say "dirty IAC?" They get gunked up and need to be cleaned out regularly. Get a new gasket from Ford, then take it off and hose it out thoroughly with Gummout. Reinstall with a new gasket, and you should see a snappy idle that stays steady, and jumps quickly back to idle when you stop. Turning on accessories can add a load to the engine, as well as turning the wheel at idle. With a clean (and properly functioning) IAC, the engine should be able to maintain a pretty steady idle no matter what, plus or minus 100 RPM.
 
J

ja1919

Member
Jul 26, 2004
91
0
7
May 5, 2005
#3
  • May 5, 2005
  • #3
i have already cleaned the iac twice with cleaner..the iac is the cleanest iam gonna get it...
 
S

SamSnyder

New Member
Mar 30, 2005
196
0
0
May 5, 2005
#4
  • May 5, 2005
  • #4
Head for the junkyard. Those 5.0-specific IAC's were on plenty 'o cars, including Lincoln LSC's and T-Birds, as well as 5.0 Mustangs. They seem to be in plentiful supply here in L.A. There was also a straight version that had the connector facing straight out instead of right angled, but it might fit as well.
 
J

ja1919

Member
Jul 26, 2004
91
0
7
May 5, 2005
#5
  • May 5, 2005
  • #5
what about old crown vics and LTDS and mercury marquie????
 
J

ja1919

Member
Jul 26, 2004
91
0
7
May 5, 2005
#6
  • May 5, 2005
  • #6
anyone?????
 
S

SamSnyder

New Member
Mar 30, 2005
196
0
0
May 6, 2005
#7
  • May 6, 2005
  • #7
I think any 5.0 will work, but I also think you're gonna see that only the fox-body ones have the right angle electical connector on them.
 

darthcual

Member
Mar 31, 2005
985
19
18
Arlington, TX
May 6, 2005
#8
  • May 6, 2005
  • #8
If you have the green Auto Zone (sings: get in the zone) has them for 52.99. I would have just cleaned mine but it snapped in half (damn ford and there cheap labor).
 
You must log in or register to reply here.

Similar threads

8
Engine Rough idle and aggressive sputtering when accelerating
  • 88vertible
  • Aug 13, 2025
  • Fox 5.0 Mustang Tech
Replies
4
Views
1K
Fox 5.0 Mustang Tech Dec 13, 2025
Jarhead67
J
SURGING IDLE / NO IDLE CHECKLIST FOR 1999–2004 MUSTANG GT (4.6L 2V) - Work In Progress
  • Noobz347
  • Aug 30, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
819
1996 - 2004 SN95 Mustang -General/Talk- Aug 30, 2025
Noobz347
SURGING IDLE / NO IDLE CHECKLIST FOR 1996–1998 MUSTANG GT (4.6L 2V) - Work In Progress
  • Noobz347
  • Aug 30, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
686
1996 - 2004 SN95 Mustang -General/Talk- Aug 30, 2025
Noobz347
Engine 1990 LX 5.0L EFI Mustang Fuel Management Problems - HELP!
  • 5.0LXStanger
  • May 25, 2025
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
45
Views
2K
Fox 5.0 Mustang Tech Jul 11, 2025
5.0LXStanger
A
Resolved 03 GT Parasitic Draw Fuse 26 (PCM)
  • Antrix
  • Mar 22, 2025
  • SN95 4.6L Mustang Tech
Replies
2
Views
667
SN95 4.6L Mustang Tech Mar 24, 2025
89ripper
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?