• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

bad vibration

  • Thread starter Thread starter coupecop
  • Start date Start date Apr 26, 2007
C

coupecop

New Member
Aug 9, 2006
166
0
0
mission texas
Apr 26, 2007
#1
  • Apr 26, 2007
  • #1
I just changed the gears on my car 2 weeks a since then I have had a bad vibration . I have changed I joints motorMounts transmount and crossmember Bushings . I don't know what else to do can some one help. Thanks in advance
 

Foxfan88

My Grandpa has great wood.
Sep 13, 2004
2,487
4
0
Miami, Ok
Apr 26, 2007
#2
  • Apr 26, 2007
  • #2
consider replacing the stock steel DS with a nice alum unit, a better balanced and lighter unit it should cure your vibration. alot of people get a DS vibration after a gear swap due to the DS spinning ALOT faster than it ever has before.

i had a bad vibration and the Alum DS cured it and then some. smooth as silk cruising down the road.
 

Flavadave4

Active Member
Nov 28, 2003
1,044
21
49
Utica, NY
Apr 27, 2007
#3
  • Apr 27, 2007
  • #3
Aluminum Drive Shaft will most likely cure your problem, unless you had the axle out for the gear install, then you want to check your pinion angle to verify nothing is binding up.
 

nonglossjason

I did not have intercourse with a sheep.
Jan 27, 2006
138
20
39
Apr 27, 2007
#4
  • Apr 27, 2007
  • #4
what about the harmonic balancer? you check that yet?
 
C

coupecop

New Member
Aug 9, 2006
166
0
0
mission texas
Apr 27, 2007
#5
  • Apr 27, 2007
  • #5
I had changed the balancer almos 8 months ago so it fairly new
 

Aliate X

Member
May 9, 2005
602
1
18
Rockland NY
Apr 27, 2007
#6
  • Apr 27, 2007
  • #6
+1 for aluminum d/s, I had a vibration after my gears were done, d/s cured it. the stock d/s just isnt balanced up to the speeds that your spinning it after you put gears in the car. If you think about it your now crusing down the highway in 5th at like 3k rpms, with stock gearing 5th at 3k rpms is god knows how many mph....
 
You must log in or register to reply here.

Similar threads

N
Vibration after new clutch
  • nipple_looker
  • Sep 20, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
745
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 26, 2026
fasterthangas
F
L
95 gt engine vibration
  • lenzgt
  • May 11, 2026
  • 1994 - 1995 Specific Tech
Replies
6
Views
384
1994 - 1995 Specific Tech May 26, 2026
lenzgt
L
T
Drivetrain TREMEC TKX 1–2 Grinding Issue at ~4,000 Miles + Poor Warranty/Customer Service Experience
  • Ttopfoxguy
  • Oct 10, 2026
  • Fox 5.0 Mustang Tech
Replies
5
Views
338
Fox 5.0 Mustang Tech Oct 15, 2026
JMG9350
J
T
Vibrating clutch pedal
  • t.hite10
  • Aug 10, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
8
Views
281
1996 - 2004 SN95 Mustang -General/Talk- Aug 11, 2026
squeak93
S
Drivetrain 8.8 Pinion and 302 rear main seal leaks after replacing. 93 5.0 with t-5
  • Steigy4827
  • Jun 23, 2025
  • Fox 5.0 Mustang Tech
Replies
10
Views
892
Fox 5.0 Mustang Tech Apr 1, 2026
Steigy4827
S
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?