bad vibrations

5.0fox

Member

Feb 10, 2003

410

0

17

buckley/enumclaw wa

Sep 18, 2004

#1

• Sep 18, 2004

• #1

im getting a really bad vibration at about 60 mph i had all 4 tires blanced checked my motor mounts and made sure my drivline was still balanced. what else could it be. it does it not matter what gear your in and it still does it with the clutch in. im stumped on this one guys plz help.

thx in advance

 

HISSIN50

"How long does it take to get help in here?

15 Year Member

Nov 29, 1999

31,179

34

129

Sep 18, 2004

#2

• Sep 18, 2004

• #2

if it does it in any gear, does it also do it in neutral? dont forget the harmonic balancer.

good luck.

 

Ourobos

Member

Apr 12, 2004

260

1

17

Sep 18, 2004

#3

• Sep 18, 2004

• #3

Sounds like the driveshaft to me... Had the same problem, new shaft solved it..

 

jaidedeye

Member

Apr 4, 2004

627

0

16

Goldsboro nc

Sep 18, 2004

#4

• Sep 18, 2004

• #4

u-joints maybe?

 

5.0fox

Member

Feb 10, 2003

410

0

17

buckley/enumclaw wa

Sep 18, 2004

#5

• Sep 18, 2004

• #5

it does it in neutral the u-joints are still very tight

what could cause the driveline to do this?
i looked at it and cant see anywhere that the weights came off

 

HISSIN50

"How long does it take to get help in here?

15 Year Member

Nov 29, 1999

31,179

34

129

Sep 18, 2004

#6

• Sep 18, 2004

• #6

if it does it in neutral (and stationary), it is not the DS. i stand by my first post as something to check.

good luck.

 

red ink

Founding Member

Apr 8, 2002

746

1

0

Arizona

Sep 18, 2004

#7

• Sep 18, 2004

• #7

make sure your h pipe and catback arent rattling against the tranny cross member, or the gas tank, and the park under your car where the trunk would be

 

5.0fox

Member

Feb 10, 2003

410

0

17

buckley/enumclaw wa

Sep 19, 2004

#8

• Sep 19, 2004

• #8

its not the balancer because it only does it when you get up to 60 mph it has nothing to do with the rpm i can turn the ignition off and it will still do it.
could it be the balljoints?

im stumped guys help

 

5.0fox

Member

Feb 10, 2003

410

0

17

buckley/enumclaw wa

Sep 19, 2004

#9

• Sep 19, 2004

• #9

just to clear this up i think some of you are thinking i meant stopped in neutral but i meant get up to 60 then slide it into neutral

 

Turbo6

New Member

Sep 17, 2004

15

0

0

Sep 19, 2004

#10

• Sep 19, 2004

• #10

You've had your driveshaft checked by a driveline shop? I read your first post and wasn't clear on that.....If not you may want to do so. Also if you haven't had it out and back in recently you may want to make sure you ds bolts aren't loose