• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Balancer Question?

  • Thread starter Thread starter MY 85 GT
  • Start date Start date May 23, 2008

MY 85 GT

10 Year Member
Mar 7, 2008
1,852
208
104
New Jersey
May 23, 2008
#1
  • May 23, 2008
  • #1
Ok i wanted to check my timing because i heard pinging so i cleaned the balancer off marked 10 degress BTDC....saw 0 ATDC AND 30 BTDC... so i started the car pulled the vac advance plugged the hose....put the timing light on it and WOW it was way past 30 degress...so i back it down still cant get the 10 degree mark to the pointer i know the car is running fine now no pinging but the mark isnt right,,,Can the balancer move is it off....i mean its not even close to the mark like it sjhould be...Im confused do i need a new balancer? i guess i can do it by ear...but thats not 100 percent....what should I do?????
 

ScratchinFerTra

Member
May 11, 2007
68
0
6
Mebane, NC
May 23, 2008
#2
  • May 23, 2008
  • #2
You can get #1 cylinder to top dead center and look at the balancer to see the position. This will confirm if the balancer spun on the inner hub depending what the timing mark says at TDC. While you have it there, you can rotate the distributorso the rotor lines up with the #1 plug to know you are at 0 degrees.
 

MY 85 GT

10 Year Member
Mar 7, 2008
1,852
208
104
New Jersey
May 23, 2008
#3
  • May 23, 2008
  • #3
That is what i think i was going to do today to see if the balancer did move....I think it did.....
 
You must log in or register to reply here.

Similar threads

Distributor installed wrong
  • djj62478
  • Jun 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
347
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 21, 2026
CAMTWO1070
F
Fox 1990 Mustang GT 5.0 A9L – Engine suddenly shuts off but immediately restarts when key turned
  • FishermansFriend
  • Aug 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
16
Views
683
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 30, 2026
General karthief
G
Help with initial Microsquirt ignition setting
  • germain101
  • Nov 13, 2025
  • Digital Self-tuning Forum
Replies
3
Views
723
Digital Self-tuning Forum Nov 15, 2025
Mustang5L5
Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
482
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
Engine TDC @ 30 degrees?
  • DadLife0724
  • May 3, 2024
  • Fox 5.0 Mustang Tech
  • 2
Replies
22
Views
1K
Fox 5.0 Mustang Tech Aug 22, 2025
DadLife0724
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?