I currently have a borla exhaust and was thinking of getting a Bassani o/r X pipe, would it be too loud considering that i have 6 cats right now?? also, whats u guys opinion on the sound?? any sound clips??
Bassani O/R X pipe
- Thread starter Black Stang 97
- Start date
Red03Mustang
New Member
- Apr 26, 2004
- 373
- 0
- 0
I'd think it is a quiet setup.
From what I understand, Borla (not stingers) is one of the quieter exhausts already. So with the stock mid pipe, nah, I'd say it would be pretty quiet.
Correct me if I'm wrong guys!
Black Stang 97 said:
From what I understand, Borla (not stingers) is one of the quieter exhausts already. So with the stock mid pipe, nah, I'd say it would be pretty quiet.
Correct me if I'm wrong guys!
I searched that entire site, did extensive advanced searches, posts from the beginning, etc. could not find a clip of 1-chambers, as promised!!!!!ACSPONY said:
Any direct links?
Sick96Stang
New Member
Black Stang 97 said:
There is louder exhausts than Borla and Bassani O/R X-pipe I will say that much. It really depends on what is "to loud" for you. It will definetely be louder putting on that O/R X-pipe especially since you are going from 6 cats to 0 cats but the sound will be amazing. If you are worried about it being to loud you can always buy a nice high-flow catted X-pipe. Get rid of that 6 cats mid-pipe though it is slowing your car down and dulling its sound.
Sick96Stang
New Member
Bill9000 said:
I see 2 clips of flowmaster 1 chamber mufflers. One on a 96 GT with BBK O/R H-pipe, factory headers with 1 chamber flows, the other 02 GT with factory H and factory headers with 1 chamber flows.
http://www.mustangexhaust.com/4.6sounds.htm
RageStangX
New Member
Bill9000, the reason u couldnt find the clips is because u probably arent registered lol...i had the same problem.
PoXiC said:I'm running an illegal Bassani and flows. IMO its very very loud. It sets off car alarms everywhere. It wakes up my neighbors. It scares kids and animals. It drones out my sterio. It shakes my house when I start it in the garage.
I love it.
I have a Bassani O/R X and Magnaflow side exhaust. It's mellow when idling, but when WOT, watch out!!!
crew_dawg16
New Member
I got my Bassani O/R X from a guy who had it on with his flows and it was LOUD. But coupled with my Magnaflows it has a more refined, docile tone until your foot is all the way in it. Then it's pretty loud.
I can't agree more as specialy when it sets off ricersPoXiC said:I'm running an illegal Bassani and flows. IMO its very very loud. It sets off car alarms everywhere. It wakes up my neighbors. It scares kids and animals. It drones out my sterio. It shakes my house when I start it in the garage.
I love it.
car alarms and it wakes up your neighbors at 5 AM!
Sick96Stang
New Member
Darkhorse845 said:I can't agree more as specialy when it sets off ricers
car alarms and it wakes up your neighbors at 5 AM!
Any O/R pipe is gonna do that and most mufflers with an aftermarket mid-pipe with high-flow cats will also.
they ae charging me $230 for just the o/r X bassani, is it a good price or should i find it somewhere else?? Im gonna try to dothe installation since they charging me $100 to throw it on, it didnt seem to hard when i looked, i saw like 2 bolts that i think im onna have trouble with, any advice on taking it off??
04DarkShadowGT
Member
I would let them install it for $100 just to be safe, many stories of stripped bolts and such.
My local shop tried to charge me like $500 including a mac h. I told em to F off.
My local shop tried to charge me like $500 including a mac h. I told em to F off.
crew_dawg16
New Member
Black Stang 97 said:
What you need is a breaker bar (or a cheater pipe to put over the end of your ratchet) to get leverage. Remember, leverage is your friend. Next, you need a 6 or 9 inch extension. Try to use 3/8ths drive because 1/2 is harder to get into the passenger side. I don't know exactly how a 97's exhaust is setup compared to 99+, but all I needed other than those tools was a swivel. Our nuts on the midpipe are 15mm so maybe yours are too. Just get a good angle on the nuts before you try to loosen them and use a little WD-40 if they won't break loose.
crew_dawg16
New Member
04DarkShadowGT said:
Anybody with the knowledge of how to rotate tires could do this job easily. Don't be afraid of stripping nuts, just remember, get a good angle and get some leverage with a longer handle. No need to be afraid.
Similar threads
