BBK SSI intake?

93notchback · Feb 18, 2008

Anyone running a bbk ssi intake?

bloopbloob · Feb 18, 2008

93notchback said:
Anyone running a bbk ssi intake?

yes. BBK has sold some iirc......

87foxstang · Feb 18, 2008

The majority say they are bad

Although I remember a few guys on here say they liked theirs

85ragtop · Feb 18, 2008

There have been a ton of threads on this. Search and see what you come up with.

mustangfan1990 · Feb 18, 2008

I have a BBK SSI intake on mine. They are good I think if you are not wanting to go wild. Mild motors they run good on. I like mine but I dont like it. It keeps blowing the gasket betwwen the upper and lower intake. And it is not recommended to spray on those intake. My car was faster on motor than on Nitrous and I know everything was hooked up right. I took to a tuner to have it Nitrous tuned and he said the intake was too spaced out. It has a cap on the top of the intake you can take off and when you do, it is like a big ass open space. No direction for the air to keep a steady motion 1 direction

Fox8950 · Feb 21, 2008

Its hard to do a search for things when the search feature don't recognize anything under 4 characters long

BlownFiveLiter · Feb 22, 2008

Fox8950 said:
Its hard to do a search for things when the search feature don't recognize anything under 4 characters long

Searching for "BBK SSI intake" comes up with 199 relevant threads.

stykthyn · Feb 22, 2008

If I could find one that doesnt cost an arm and a leg I would run it.

Ike83 · Feb 23, 2008

I was giving serious consideration to purchasing the BBK SSI based soley on the fact that it looked "cooler" than the other more traditional intakes. However, after starting the last thread on this particular intake, I was convinced NOT to go the BBK SSI route, and instead went ahead with the Cobra. I am definitely not disappointed in my decision to say the least.

Mustang5L5 · Feb 23, 2008

Not a big fan of the looks. I prefer my Cobra

mustangfan1990 · Feb 23, 2008

I had a cobra and it does make more power than a Cobra

BRYAN ROGERS · Feb 23, 2008

mustangfan1990 said:
It keeps blowing the gasket betwwen the upper and lower intake.

Sorry I took this statment out of context but I'm really curious about how the upper to lower gasket is "blowing"?

93notchback · Feb 25, 2008

went with a trick flow intake.

mustangfan1990 · Feb 25, 2008

BRYAN ROGERS said:
Sorry I took this statment out of context but I'm really curious about how the upper to lower gasket is "blowing"?

the intake between keeps ripping and sucking air (vacuum leak) and the is bolted down tight and everything. One think I do like about the BBK is it has dow pins to hold the gasket in place while lowering the upper intake on

Ike83 · Feb 25, 2008

I think it's the sickest LOOKING intake on the market.

mustangfan1990 · Feb 25, 2008

Ike83 said:
I think it's the sickest LOOKING intake on the market.

check out my pics looks really good with a supercharger bolted to it

Ike83 · Feb 25, 2008

Looks nice!

Flavadave4 · Feb 25, 2008

Nice looking, but I havent heard the best things about the gasket set they have for them...if I remember they didn't make any more power than the rest of them either.

StangItMan · Mar 1, 2008

Reply

93notchback said:
Anyone running a bbk ssi intake?

Running the BBK SSI with no major complaints.

Used Fel-Pro gaskets ... always do.
No fuel rail issues at all
Did have oil issues on driver side plugs ... Moroso catch can saved the day!
Used Copper Coat between upper and lower ... did not like the gasket match to ports.

Will be selling it soon. Using larger bump stick and Vic JR heads soon, so will probably go RPM II.

This intake looks cool and works very well with mild mod packages amongst our friends here in Florida.

Remember everything out there has its place - - - shop wisely

bandmc · Mar 21, 2008

Best intake on the market. Makes more power than anything out there. Even a PORTED cobra.

BBK SSI intake?

Member

Member

Member

BTW, I like dudes.

New Member

Member

have car, will race....wait, it doesn't run

I want to measure mine. It doesn't look that tall.

Member

That is…until I whipped out my Bissell

New Member

Member

New Member

Member

New Member

Member

Active Member

Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency