Been a while... couple videos

jomull55 · Nov 11, 2010

It's been a while since I've posted anything over here....

Figured we would awake the neighbors...

My syncros are absolutely shot... new transmission to come this winter.

YouTube - 2001 Ford Mustang GT hitech cams

http://s288.photobucket.com/albums/ll198/jomull55/?action=view&current=MAH00738.mp4

1fun281 · Nov 11, 2010

She cams so good at idle

Hey i see your sig says dynomax mufflers, are those the dynomax bullet mufflers in the videos by any chance? Im looking for a good video of them, because im considering putting them on my 99 with an offroad x?

jomull55 · Nov 11, 2010

1fun281 said:
She cams so good at idle

Hey i see your sig says dynomax mufflers, are those the dynomax bullet mufflers in the videos by any chance? Im looking for a good video of them, because im considering putting them on my 99 with an offroad x?

The sig is wrong since i've not been on here for a while.... I did have the dynomax super turbo's on it but they were far too quiet.

Currently the car has a Bassani SS catback on it with the upr o/r x and factory headers.

navarro98gt · Nov 11, 2010

Sounds good. What kind of numbers did she put down??

1fun281 · Nov 11, 2010

jomull55 said:
The sig is wrong since i've not been on here for a while.... I did have the dynomax super turbo's on it but they were far too quiet.

Currently the car has a Bassani SS catback on it with the upr o/r x and factory headers.

Are the super turbo's anywhere similar to the dynomax race bullet mufflers. I dont know much about those type of mufflers ive always been a chambered muffler guy, right now i have flowmasters with my offroad x and it sounds nasty and is loud, but i want it to get alot louder and im told straight through mufflers will do the trick. Now im just trying to figure out if i will like the sound.

jomull55 · Nov 11, 2010

navarro98gt said:
Sounds good. What kind of numbers did she put down??

It has not been on the dyno yet since i tune it myself.

jomull55 · Nov 11, 2010

1fun281 said:
Are the super turbo's anywhere similar to the dynomax race bullet mufflers. I dont know much about those type of mufflers ive always been a chambered muffler guy, right now i have flowmasters with my offroad x and it sounds nasty and is loud, but i want it to get alot louder and im told straight through mufflers will do the trick. Now im just trying to figure out if i will like the sound.

If you just want loud and obnoxious... sound like poo poo go ahead and put straight pipes, glasspacks, or slp LM1's on it

magnaflow magnapacks will be a bit between these two IMO

if you want it to be loud and have a nice tone buy borla, bassani,

navarro98gt · Nov 11, 2010

jomull55 said:
It has not been on the dyno yet since i tune it myself.

Track times? I’m curious to see how those cams do with ported heads.

jomull55 · Nov 11, 2010

navarro98gt said:
Track times? I’m curious to see how those cams do with ported heads.

I went 13.80 @ 105 with a 2.2 60' on a couple 90 degree days...

car still has the stock gear in it which hurts..

i think the hitech's are spec'd to be in the stock head. If you have or want to get ported heads i'd go with another cam...

BurningRubber · Nov 11, 2010

Welcome back... sounds good. Seems like on some cars the Hitechs are more noticeable at idle than others. Yours is definitely noticeable.

Sonic04GT · Nov 11, 2010

Those cams sound great. Did you do any other work or just drop em in? Stock valve springs? I'm a noob but I really want the Hitech Stage 2s. Just worried about piston/valve contact.

Deleted member 38176 · Nov 12, 2010

Very nice! Im getting my HTM Stg. II's at the end of the month and I can't wait!

jomull55 · Nov 12, 2010

BurningRubber said:
Welcome back... sounds good. Seems like on some cars the Hitechs are more noticeable at idle than others. Yours is definitely noticeable.

I think the exhaust has a lot to do with how it sounds at idle... when i had the dynomax mufflers on it wasn't near as noticeable as it is now.

jomull55 · Nov 12, 2010

Sonic04GT said:
Those cams sound great. Did you do any other work or just drop em in? Stock valve springs? I'm a noob but I really want the Hitech Stage 2s. Just worried about piston/valve contact.

I have comp valvesprings, also my valves are not stock so that gives a little more wiggle room for PTV. I dropped them in without "properly" degreeing them, i just put them in at the stock intake centerline without measuring. The motor will come out again this winter to either go back to PI cams (boost) or I will degree them correctly and keep them in and stay n/a... still haven't made my mind up yet. So these may be for sale come winter time.

Been a while... couple videos

jomull55

New Member

1fun281

Member

jomull55

New Member

navarro98gt

Member

1fun281

Member

jomull55

New Member

jomull55

New Member

navarro98gt

Member

jomull55

New Member

BurningRubber

Sonic04GT

Member

Deleted member 38176

jomull55

New Member

jomull55

New Member

Similar threads

Been a while... couple videos

New Member

Member

New Member

Member

Member

New Member

New Member

Member

New Member

Member

Deleted member 38176

New Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency