best heads for a 351

aleborjas

New Member

Sep 11, 2005

610

0

0

Nov 16, 2006

#1

• Nov 16, 2006

• #1

hi, i whant to know what heads are good for a 351 overbored to .040 arround 10.1 CR maybe using stage 2 TFS cam (the engine is HR) auto trans, Air gap intake carbed, i whant A good head but not too spencive i was looking in jegs and summit this heads Dart PRO 1 #13211112 the are 195cc intake and 75cc exhaust, i whant to see experts answers please....

 

8

86bluecobra

Advanced Member

Dec 20, 2004

4,265

12

69

B.C. Canada

Nov 16, 2006

#2

• Nov 16, 2006

• #2

I know i am happy with my vic jr heads. they give me room to grow in my combo.

 

aleborjas

New Member

Sep 11, 2005

610

0

0

Nov 17, 2006

#3

• Nov 17, 2006

• #3

anyone else? i dont realy like victor Jr or any other eddy's heads

 

Modular2v

Founding Member

Jun 30, 2002

3,222

23

99

oklahoma

Nov 17, 2006

#4

• Nov 17, 2006

• #4

well since you dont like vic jrs. . . . look into AFRs or Trick Flow but expect to pay more!

 

T

thompsonsd

Founding Member

Aug 15, 2002

144

0

0

Southern Maryland

Nov 17, 2006

#5

• Nov 17, 2006

• #5

AFR's all the way! They may cost a little more, but they are still the best value for the dollar though. They outperform, plain and simple. They even come CNC ported.

I'm still using the AFR 165 heads from my 302 on my 351w, but will upgrade to the AFR 205 heads sometime next year.

Everyone else who's seen the freshly unpackaged AFR's please repsond also. Everyone who saw mine before I installed them was drolling and wanting to trade.

 

aleborjas

New Member

Sep 11, 2005

610

0

0

Nov 19, 2006

#6

• Nov 19, 2006

• #6

are dart aluminum heads good? 195CC intake and 75CC exhaust 2.02 intake valve and 1.6 exhaust valve part #13211112 i saw them in summit and they are not expensive

 

aleborjas

New Member

Sep 11, 2005

610

0

0

Nov 20, 2006

#7

• Nov 20, 2006

• #7

ANY????????
i'd like to see answers from experts like ED, Rick etc

 

S

seijirou

Founding Member

Aug 15, 2002

2,417

4

48

DFW

Nov 20, 2006

#8

• Nov 20, 2006

• #8

The darts are decent. You don't care about emissions? If so your head choice is cake. Don't bother with what you see all over the forums, edelbrock, afr, trick flow etc. You want dart, brodix, all the stuff you don't hear about which probably explains why I can't think of any more off the top of my head.

 

S

seijirou

Founding Member

Aug 15, 2002

2,417

4

48

DFW

Nov 20, 2006

#9

• Nov 20, 2006

• #9

Here's some fun heads. http://www.ford-y-block.com/sbf_head.htm

 

Modular2v

Founding Member

Jun 30, 2002

3,222

23

99

oklahoma

Nov 20, 2006

#10

• Nov 20, 2006

• #10

seijirou said:

Here's some fun heads. http://www.ford-y-block.com/sbf_head.htm

Click to expand...

those are raised port/canted valve heads. . . . . it is going to take a little more than just bolting those on to make them work! And his motor is too small for them!

 

S

seijirou

Founding Member

Aug 15, 2002

2,417

4

48

DFW

Nov 20, 2006

#11

• Nov 20, 2006

• #11

Modular2v said:

those are raised port/canted valve heads. . . . . it is going to take a little more than just bolting those on to make them work! And his motor is too small for them!

Click to expand...

Naaaaaaaahhhhhhh.
They're -just right!-

Besides, once you've got those, you gotta go get all the other goodies to make them work.
"not to be used on the street" = must have

 

thehueypilot

Active Member

Feb 25, 2004

1,084

0

37

Medina,Tennessee

Nov 20, 2006

#12

• Nov 20, 2006

• #12

I got AFR225's and I have beat the heck out of them (NOS spray to major detonation)and they have held up nicely. I would buy them again.

 

5.0 HOtrain

Founding Member

May 20, 2001

2,247

0

47

New Hampshire

Nov 20, 2006

#13

• Nov 20, 2006

• #13

For a overbore 351, TFS high ports, or maybe even some canfields. I have never run the dart heads, and dont know anyone that has, sorry. I have had both AFR and TFS heads, no problem with either one.
mike.

 

R

r.barn5.0

New Member

May 21, 2006

107

0

0

Nov 20, 2006

#14

• Nov 20, 2006

• #14

made 475hp on engine dyno with mine with AFR 185's and a cam VERY similar
to the TFS 2

instead of TFS stg2, check out CompCams XFI 236HR-14
very happy with its results
( obvilously your using a 351W roller cam block? )

 

aleborjas

New Member

Sep 11, 2005

610

0

0

Nov 20, 2006

#15

• Nov 20, 2006

• #15

in my country whe don't care about emisions and yes is a roller block how is the iddle of that cam because is for a daily driver with a/c

 

silverstangman

New Member

Mar 26, 2003

413

0

0

Eastern NC

Nov 21, 2006

#16

• Nov 21, 2006

• #16

tfs stage 3's hog ported here. not exactly an emissions car though lol. but i would definitely recommend tfs heads as they are good priced and u can port the hell out of em. downside to afr's is the lack of meat to work with, being cnc'd is cool if you want a box stock head on a daily driver/weekend racer.