I know man. It's just frustrating. I'm not one to go out and start public battles, but every once in awhile we all have lapses in judgement. I made my point, and I'll drop it. Hope the OP at least got a few options out of this discussion.
I know man. It's just frustrating. I'm not one to go out and start public battles, but every once in awhile we all have lapses in judgement. I made my point, and I'll drop it. Hope the OP at least got a few options out of this discussion.Interesting. Once again,the OP on this post is gone....never to be heard from again. As far as TheLeech, I've seen your tuning videos on Youtube. I understand you were "called out" on here,but your replies could've been less pompous. All you had to do was explain your background and maybe throw up a video or two.Of course these long term members are gonna give you some grief.
Yes, there are a number of car in the 5's on stock computer. Ben Head has done some crazy stuff with CBAZA on his personal car. There's really no magic bullet here. It comes down to keeping the RPMs low, good balance on the engine, and paying attention to the plugs and fuel... not getting greedy, and taking the time to make sure the fine details are not overlooked. Keep back pressure from getting out of hand, keep the timing low, watch the commanded fuel in relation to before, during, and after peak torque. There's only so far you can push a stock block.Harmonics split the block, the casting is thin in the webbing above the crank up to the cam. With an imbalance on the crank being slung around the forces are immense at 6k rpm, add to this the increased cylinder pressures ect and the main caps begin to "walk" this slight twisting action accompanied by the harmonics are what fatigue the block material and eventually cause a failure.
beyond that no matter how well the engine is built, designed or what parts used detonation will wipe it out quickly. once the wall of fuel is consumed in the chamber parts go by by...
as for our new friend, @TheLeech405 I would love to discuss some of the techniques you use to increase longevity. I have been successful myself in making big power but I do not post about it. I let my customers do that for me. I have found any knock sensor completely blind at WOT conditions on a modified engine with any significant internals or mechanical cam. Unless there is some holy grail system you prefer to use, some are significantly better than others.
As for ignoring everyone but yourself, thank goodness you graced us with your presence.
Its not a stock bottom end, but a stock block... our nitrous car does 5.XX at 120 in the 1/8th so yes it is very possible.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?